Dongfeng Jiayun fuel truck chassis configuration: Dongfeng Jiayun four chassis, the cab can be turned forward, equipped with Yuchai 130 hp diesel engine, 4 m 2 wheelbase, 3.5 ton front axle, 8.5 ton rear axle, five gear box, 8.25/R20 steel wire tire, air brake, dynamic rotation, ABS, front disc brake, speed limit device, exhaust pipe front. Dongfeng Jiayun 9.4 square fuel tanker standard configuration: fuel tank body volume, specifications strictly according to the announcement of 9.4 cubic meters, the actual volume of the tank is: 11.2 square, the maximum can hold 7.8 tons of gasoline, 9.3 tons of diesel.
ã€The main technical parameters】
Product trademark Chusheng
Bulletin Lot 277
Product Name CSC5123GJYE type fuel truck
Product No. ZLWDR4YL01J
Total mass (Kg) 11950
Tank volume (m3) 9.4
Rated load mass (Kg) 6270
Dimensions (mm) 7300 × 2300 × 2800
Curing quality (Kg) 5485
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 22/13
Front overhang / rear overhang (mm) 1320/2180
Number of axes 2
Wheelbase (mm) 3300, 3650, 3800, 4200, 4500, 4700, 3950
Axle load (Kg) 3400/8550
Maximum speed (Km/h) 80
Other 1, transport medium: gasoline, density 700 kg / cubic meter, category number: 3, effective volume of the tank: 9.4 cubic meters, tank dimensions (length × long axis × short axis) (mm): 4800 × 2050 ×1420. The tanker is installed on the left or right side of the frame. The model and manufacturer of the fueling device: BL1111Z/Zhuhai Beiling Fueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF-222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd. 2, side, rear protection is cold-formed steel / Q235, welding, the rear protective section is 120mm high, the section width is 50mm, and the lower edge is 500mm higher than the ground. The vehicle color is optional and the text spray position can be changed. 3, the car should be equipped with a satellite positioning function of the tachograph; only the radial tire, speed limit device, the chassis of the front disc brake; optional same series single row cab; ABS system manufacturer / model: Dongfeng Electronics Technology Co., Ltd. Brake Systems Inc. /3631010-C2000. (This article comes from Xiagong Chusheng)
We have supplied our Lighting poles to Australia, Columbia, England, Kuwait, Iraq, Philippines, Pakistan and etc.
Our Lighting poles are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
Lighting Pole, Transmission Line Pole, Solar Lighting Pole, Single Arm Lighting Pole
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com