Hydraulic Butt Fusion Welding Machine TSD630:
This machine is designed for butt welding of pipe-to-pipe and pipe-to-fitting of PE PP PVDF and
other thermo-plastic materials.It can work in trenches,worksite and workshop,and it is an ideal
joining equipment for water and gas supply pipelines.
Characteristic & Benifit:
1.Detaching device is especially designed to break off melted pipes end from the heating plate
on the expiry of heating up.
2.Safety switch enables the trimmer to start only when it is located in the operation position.
3.A mechanical lock excludes the disengagement of the trimmer during the operation
4.Removable heating plate with DuPont high quality non-stick PTFE coating, and also equipped
with digital temperature controller
5.Low temperature difference in heating plate surface, within7 degree
6.Steel stand for trimmer & heating plate is with location pin for heating plate for carrying protection.
7.Incorporated with large easy to read scale pressure gauge, accumulator, pressure regulation
valve, swing check valve, high pressure hoses, and quick couplers
8.Imported oil seal & Italian quick couplers
9.Fine operation panel with clearly strong meshing printing character
Specification & Detail
Â
| Model | TSD630 |
| Welding range | 315 355 400 450 500 560 630mm |
| Power supply | 380V±10%, 50Hz |
| Overall cylinder section | 23.1CM2 |
| Max. Pressure | 6MPa |
| Total power | 12.2KW |
| Heating plate power | 9.2KW |
| Trimmer motor power | 1.5KW |
| Hydraulic unit motor power | 1.5KW |
| Heating plate Max. Temp. | 270ºC |
| Heating plate temperature difference | ±7ºC |
| Manufacture standards | ISO12176-1 |
| Overall Weight (kg) | 622KG |
Â
| Standard machine includes | √ Main frame with 4 main clamps only | ||
| √ Complete hydraulic unit | |||
| √ Carrying stand with trimmer & heating plate | |||
|
Optional parts |
Layer inserts |
630*560,560*500,500*450,450*400,355*400,355*315 | |
| Single inserts |
Wide inserts pipe-to-pipe |
630*560,630*500,630*450,630*400, | |
| Beveled inserts pipe-to-fitting | 630*560,630*500,630*450,630*400,630*355,630*315 | ||
Company Information:
TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao
airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and
cost for our esteemed clents. TSD Plastic Company has its own plastic sheet production line,
adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic
sheet and plastic welding rod All the products are produced at its own workshop from raw
material to end products, so the best quality of products can be controlled. TSD products are
certified to internationalstandards like DVGW, ISO9001, Petro China ect, anexported to more
than 20 countries, which has got good reputation because of good quality with very competitive
prices!
Â
Hydraulic Butt Fusion Welding Machine TSD630:
This machine is designed for butt welding of pipe-to-pipe and pipe-to-fitting of PE PP PVDF and
other thermo-plastic materials.It can work in trenches,worksite and workshop,and it is an ideal
joining equipment for water and gas supply pipelines.
Characteristic & Benifit:
1.Detaching device is especially designed to break off melted pipes end from the heating plate
on the expiry of heating up.
2.Safety switch enables the trimmer to start only when it is located in the operation position.
3.A mechanical lock excludes the disengagement of the trimmer during the operation
4.Removable heating plate with DuPont high quality non-stick PTFE coating, and also equipped
with digital temperature controller
5.Low temperature difference in heating plate surface, within7 degree
6.Steel stand for trimmer & heating plate is with location pin for heating plate for carrying protection.
7.Incorporated with large easy to read scale pressure gauge, accumulator, pressure regulation
valve, swing check valve, high pressure hoses, and quick couplers
8.Imported oil seal & Italian quick couplers
9.Fine operation panel with clearly strong meshing printing character
Specification & Detail
Â
| Model | TSD630 |
| Welding range | 315 355 400 450 500 560 630mm |
| Power supply | 380V±10%, 50Hz |
| Overall cylinder section | 23.1CM2 |
| Max. Pressure | 6MPa |
| Total power | 12.2KW |
| Heating plate power | 9.2KW |
| Trimmer motor power | 1.5KW |
| Hydraulic unit motor power | 1.5KW |
| Heating plate Max. Temp. | 270ºC |
| Heating plate temperature difference | ±7ºC |
| Manufacture standards | ISO12176-1 |
| Overall Weight (kg) | 622KG |
Â
| Standard machine includes | √ Main frame with 4 main clamps only | ||
| √ Complete hydraulic unit | |||
| √ Carrying stand with trimmer & heating plate | |||
|
Optional parts |
Layer inserts |
630*560,560*500,500*450,450*400,355*400,355*315 | |
| Single inserts |
Wide inserts pipe-to-pipe |
630*560,630*500,630*450,630*400, | |
| Beveled inserts pipe-to-fitting | 630*560,630*500,630*450,630*400,630*355,630*315 | ||
Company Information:
TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao
airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and
cost for our esteemed clents. TSD Plastic Company has its own plastic sheet production line,
adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic
sheet and plastic welding rod All the products are produced at its own workshop from raw
material to end products, so the best quality of products can be controlled. TSD products are
certified to internationalstandards like DVGW, ISO9001, Petro China ect, anexported to more
than 20 countries, which has got good reputation because of good quality with very competitive
prices!
Â
Bauer Rotary Drilling Rig Interlocking Kelly Bar
Over the years we keep strengthening our independent research and development ability,meanwhile we actively join the China Construction Machinery Association to learn the latest news of this industrial. Also we continue to strengthen our cooperation relationship with China University of Mining and Technology and pursue of development and innovation of our techniques.
We have passed the international Quality Certification of ISO9001:2008,our engineers are skilled in using AUTO-CAD,PRO-E and UG to design products, for the development of new products, they strictly implement the APQP&PPAP program. We provide customized services and all products meet the ISO9001 standard,also we have filed many patents.
Our main product kelly bar absorbs a number of advanced technology from home and abroad , with special advantages of high wear resistance and high torque, now we are the nominated supplier of kelly bar for rotary drilling rig manufactures from both home and abroad, such as BAUER, SOILMEC, CMV, MAIT, IMT, XCMG,ZOOMLION,CSR etc., in addition, our kelly bar enjoys a good market among the end-user customers for construction work such as high-speed railway, highway,urban viaduct,light rail,bridge,high-rise buildings and so on. We have enjoyed a good reputation among customers for many years based on our reliable
quality and perfect services.Other products include the multifunctional exchange highway guardrail post driver and the multifunctional hydraulic crawler PV post driver. Now our post driver has been widely used in construction fields such as highwayguardrail install, PV power station install, farm and orchard construction.
we has always followed our survival principle that "strives for the survival by quality, development through reputation", and our service tenet "your demand is our demand". Through continuous technological innovation we try to build our global brand.
With our high quality products, perfect services and good reputation,we are willing to cooperate with customers and create a better future together! Welcome every friend to visit our factory!
Rotary Piling Rig,Rotary Piling Machine,Hydraulic Rotary Rig,Kelly Bar Rotary Drilling Rig
Henan YikYui Prospecting Machinery Co., Ltd , https://www.yyanchordrillingrig.com