Model NO.: JT-6
Impeller Material: Cast Iron or Stainless Steel
Pump Type: End Suction Centrifugal Pump
Seal Type: Mechanical Seal
Engine Type: Water Cooler Engine or Air Cooler Engine
Max. Pass Soild Dia.: 76mm
Max. Suction Lift: 7.6m
Pump Accessories: Trailer, Silence-Box, Control Panel, Fuel Tank,etc
Rotation Speed: 750-1750rpm
Pump Spare Parts: Pump Casing, Impeller, Seal, Coupling, Bearing,etc
Trademark: Y&L
Transport Package: Standard Plywood Case
Specification: 6 inch
Origin: Shanghai, China
HS Code: 8413709990
Model NO.: JT-6
Impeller Material: Cast Iron or Stainless Steel
Pump Type: End Suction Centrifugal Pump
Seal Type: Mechanical Seal
Engine Type: Water Cooler Engine or Air Cooler Engine
Max. Pass Soild Dia.: 76mm
Max. Suction Lift: 7.6m
Pump Accessories: Trailer, Silence-Box, Control Panel, Fuel Tank,etc
Rotation Speed: 750-1750rpm
Pump Spare Parts: Pump Casing, Impeller, Seal, Coupling, Bearing,etc
Trademark: Y&L
Transport Package: Standard Plywood Case
Specification: 6 inch
Origin: Shanghai, China
HS Code: 8413709990
6 inch Sand Suction Self Priming Engine Pump
1.Introduction
JT&JU series self priming sewage pump is a kind of specialized sewage dieposal equipment, design with super strong anti-clogging and impurity disposal capability. It can be used to disposal ultra long fiber impurities and more than 3'' solids. Due to excellent self priming performance, this trash pump is also widely used in irrigation, flood drainage and underground water drainage fields.
2.Technical Parameters
| Model | Rotation  Speed |
Capacity | Head |  Motor Power | Outlet | Max.Passing  Solid Dia. |
Max. Suction Lift | ||
| rpm | m3/h | I/s | m | kw | hp | mm | mm | m | |
| JT-6 | 750* | 100 | 27.8 | 3.2 | 3 | 4 | 150 (6inch) |
76 | 2.4 |
| 850 | 125 | 34.7 | 3.8 | 4 | 5.5 | 2.7 | |||
| 950* | 150 | 41.7Â | 5.5 | 7.5 | 10 | 3.6Â | |||
| 1050 | 160 | 44.4 | 6.5 | 7.5 | 10 | 4.2Â | |||
| 1150 | 180 | 50.0Â | 8.1Â | 11 | 15 | 5.5 | |||
| 1250 | 200 | 55.6 | 9.8 | 15 | 20 | 6.4 | |||
| 1350 | 220 | 61.1 | 11 | 22 | 30 | 6.4 | |||
| 1450* | 230 | 63.9 | 14.6 | 30 | 40 | 6.7Â | |||
| 1550 | 250 | 69.4 | 16 | 30 | 40 | 7.0Â | |||
| 1650 | 280 | 77.8 | 18.3 | 37 | 50 | 7.6Â | |||
| 1750 | 310 | 86.1 | 20.5 | 37 | 50 | 7.6 | |||
3.Performance Curve
4.Application
1. Seriously polluted water dischargeÂ
2. Subsurface drainage or mine water drainage
3. Centralized and staged diaposal system of urban sewage disposal plants
4. Severe industrial and commercial sewage treatment
5. Agricultural irrigation, chemical plants
6. Sewage discharge in hospitals, hotel.etc
5.Our Service
Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
Warranty: 1 year for the pump body, 3 months for the main working parts.
Package:According to your quantity, we use plywood case which is durable for ocean transport.
Shipping: By Sea and By Air
Payment: We are accept T/T,L/C,West Union and so on.
Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need.Â
6.About Us
Our Client
Our Certificate
Our Factory
Shanghai Y&L Pump Co.,Ltd was found in 2002, which is located in Shanghai. We producing water pumps for more than 10 years, especially self priming pump, diesel engine pump and diaphragm pump. We have an office in Wenzhou which called Wenzhuo Defu Machinery Co.,Ltd.
Welcome to visit our factory!
6 inch Sand Suction Self Priming Engine Pump
1.Introduction
JT&JU series self priming sewage pump is a kind of specialized sewage dieposal equipment, design with super strong anti-clogging and impurity disposal capability. It can be used to disposal ultra long fiber impurities and more than 3'' solids. Due to excellent self priming performance, this trash pump is also widely used in irrigation, flood drainage and underground water drainage fields.
2.Technical Parameters
| Model | Rotation  Speed |
Capacity | Head |  Motor Power | Outlet | Max.Passing  Solid Dia. |
Max. Suction Lift | ||
| rpm | m3/h | I/s | m | kw | hp | mm | mm | m | |
| JT-6 | 750* | 100 | 27.8 | 3.2 | 3 | 4 | 150 (6inch) |
76 | 2.4 |
| 850 | 125 | 34.7 | 3.8 | 4 | 5.5 | 2.7 | |||
| 950* | 150 | 41.7Â | 5.5 | 7.5 | 10 | 3.6Â | |||
| 1050 | 160 | 44.4 | 6.5 | 7.5 | 10 | 4.2Â | |||
| 1150 | 180 | 50.0Â | 8.1Â | 11 | 15 | 5.5 | |||
| 1250 | 200 | 55.6 | 9.8 | 15 | 20 | 6.4 | |||
| 1350 | 220 | 61.1 | 11 | 22 | 30 | 6.4 | |||
| 1450* | 230 | 63.9 | 14.6 | 30 | 40 | 6.7Â | |||
| 1550 | 250 | 69.4 | 16 | 30 | 40 | 7.0Â | |||
| 1650 | 280 | 77.8 | 18.3 | 37 | 50 | 7.6Â | |||
| 1750 | 310 | 86.1 | 20.5 | 37 | 50 | 7.6 | |||
3.Performance Curve
4.Application
1. Seriously polluted water dischargeÂ
2. Subsurface drainage or mine water drainage
3. Centralized and staged diaposal system of urban sewage disposal plants
4. Severe industrial and commercial sewage treatment
5. Agricultural irrigation, chemical plants
6. Sewage discharge in hospitals, hotel.etc
5.Our Service
Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
Warranty: 1 year for the pump body, 3 months for the main working parts.
Package:According to your quantity, we use plywood case which is durable for ocean transport.
Shipping: By Sea and By Air
Payment: We are accept T/T,L/C,West Union and so on.
Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need.Â
6.About Us
Our Client
Our Certificate
Our Factory
Shanghai Y&L Pump Co.,Ltd was found in 2002, which is located in Shanghai. We producing water pumps for more than 10 years, especially self priming pump, diesel engine pump and diaphragm pump. We have an office in Wenzhou which called Wenzhuo Defu Machinery Co.,Ltd.
Welcome to visit our factory!