Single Heads 12/15 Colors Machine Embroidery Designs

Much Better Than Second-hand Barudan Machine!
Suitable for cap, finished garments, jeans, belt, shoes, socks, insoles, bead, sequin, cording, boring, 3D, flat embroidery.




 
I. Embroidery Machine Features
1. Single head embroidery machine with 12 or 15needles
2. Automatic thread trimmer
3. Maximum speed 1200 SPM
4. 270° Wide cap frame unit
5. 7" touch screen display showing real time stitching
6. USB input port
7. Automatic color change
8. Thread break detection
9. Pre-sew design trace capable
10. Memory size 20, 000, 000 stitches
11. Emergency stop
12. Electricity: 110V/60Hz or 220V/50Hz available
14. Low power consumption 100W to 150W
15. Built-in bobbin winder

II. Control pannel functions:
A.7" touch screen showing real time stitching
B. Manual, Semi-auto, Auto Color Change
C. Function keys including Menu, Speed up and slow
D. Multi languages available like English, French, Spanish etc.
E. Frame-moving keys, Manual Trimming
F. DOT ket to return to 100 degree
G. Start, Stop, and emergency Stop
H. Embroidery Status (Page Up/Page Down), USB Input,
I. Parameter Settings, Clear, ESC, Enter, etc.

III. Hoops/frames
A. 2 x Shirt Front Round Hoop 9 cm (3.5")
B. 2 x Shirt Front Round Hoop 23 cm (9")
C. 2 x Shirt Front Round Hoop 12 cm (4.7")
D. 2 x Jacket Back Square Hoop 30 x 30 cm (12" x 12")
E. 2 x Shirt Front Round Hoop 15 cm (5.9")
F. 1 x Sash Frame 56 x 38 cm (22" x 15")

IV. Cap attachments
1pcs cap hoop station for one machine, 1pcs cap driver and 2pcs Cap hoops for each head

V. Other accessories
Extended Table Top, Operation Manual, Tool Kit , USB driver


VI. Optional devices
1. Sequin device
2. Boring device                   
3. Simple Coiling           
4. Simple Cording
5. 8 in 1 device (for shirt pockets, socks, cap backs, bags, shirt sleeves, collar tips, gloves, cuffs of sleeves, ribbons, CD cases,)


 

Reverse Circulation Water Well Drilling Rig

Reverse circulation (or RC as it`s more commonly known) drilling is an essential tool in the mining industry. In addition to other oil rigs and drill rigs, reverse circulation drills assist in the productivity and accuracy in mining jobs.

RC drilling is a drilling method involving a large rotary drill and Air Compressor that yields high quality mineral and rock samples, free from contamination and material interference.

It is the preferred method of mineral exploration, drilling and in-pit grade control because it is fast and cost-effective.

What is RC Drilling?
Much like air core drilling, RC drilling returns cutting to the surface through an inner tube inside the rod. This is achieved by blowing air down the rods at a rate up to 1500 Pascals. This creates a pressure differential that pushes cuttings and water up via air lift.

The drilling component is powered by a pneumatic reciprocating piston (also known as the hammer), which drives a steel drill bit.

The two most commonly used drilling bits in RC systems are the fixed cutter and roller cone, both of which are advantageous depending on the project and geographical location of the site.

RC drilling is primarily used on large machinery and drill rigs and often goes to depths of 500 metres.

High quality RC equipment also has the ability to dry out the rock with large air compressors before the drill hits, which provides dry rock chips and, in turn, better samples.

Reverse circulation drilling is the predominant technique based on a number of advantages.
.A higher percentage of uncontaminated cuttings
.Drilling rate similar to open hole drilling, but can often be faster and penetrate greater depths
.One of the most accurate drilling methods
.Quick retrieval of sample rates
.Dry samples allow for easier analysis

Reverse Circulation drilling rig for water well investigation,mineral ores survey

Henan YK Prospecting Machinery Co., Ltd , https://www.yyphotovoltaicpilingrig.com