Heterogeneous Catalytic Ozone Oxidation - Acclimation Aeration Active Filter Treatment of Acrylic Wastewater Technologies The scientific research achievement appraisal meeting was held not long ago in Daqing. Experts believe that the sewage treatment technology and technology will break through the technical bottleneck of acrylic wastewater treatment, and the prospects for industrial production are worth looking forward to.
Acrylic waste water treatment has always been recognized as an environmental problem at home and abroad. It is difficult to completely remove high polymer polymers and it has always been the biggest obstacle in the treatment of acrylic fibers. In order to effectively solve this technical problem, over the years, domestic and foreign experts have put forward a number of treatment options, but it is difficult to meet the emission standards, and some even meet the emission standards, but due to the high cost, it is difficult to promote.
Anqing Petrochemical Acrylic Fiber Factory, which was put into operation earlier in the country, adopted a new process of “air floatation + sludge dewatering system and A/O biochemistry + secondary sedimentation tank treatment + aeration biological filterâ€. With increasingly stringent environmental protection requirements, Anqing Petrochemical invested more than 700 million yuan to build an acrylic fiber wastewater pretreatment plant, to a certain extent, improve the technical level of wastewater treatment of acrylic fibers and sewage treatment capacity.
According to reports, the results of this research mainly deal with the advanced treatment of acrylic fiber wastewater mainly using bio-pure oxygen aeration, A/O and other biological treatment technologies to achieve the mineralization, effective, chain breaking and opening of refractory organic components in acrylic fiber waste water. Ring effect, so as to achieve effective degradation of organic components of acrylic wastewater.
Experts believe that if this research achievement is market-oriented, its economic and social benefits are very significant. Firstly, it will enable enterprises to break away from the pressure of environmental protection and achieve substantial cleaner production. Second, it can save a lot of water resources. The output of tons of acrylic fiber products can reach 20 tons, and the annual total discharge volume can reach over 1 million tons. All can realize the recycling of water resources; once again, significant economic benefits can save a lot of sewage charges.
It is reported that Daqing Petrochemical has already begun to demonstrate the industrial production process of this sewage treatment technology.
We definitely produce all goods by ourselves, and banned for allowing any outsourcing production from other factories. It is the 1 step service from printing, surface disposal, material die-cutting, craftsmanship, QC, packing, and delivery, therefore quality is 100% assured.
2. Best material selection.
All of our goods are by use of best material from the best suppliers.
3. After sales service provide
Besides, service after sales is necessary for more understanding for your needs, we do keep a close concern.
4. Flexible quantity
If you bid is ok for both parties. We could accept any quantity, of course, we like the big quantity, as the larger quantity, the lower price and we have the ability for big order.
Repeat again: We could offer different material (paper, PVC PET and so on) or instruction (simple or complex) of packaging which with printing (or logos) on it, we welcome client to offer their design drawing to us and discuss with us.We make many high-quality paper products as well, such as: kraft paper bags,art paper bags,Kraft Paper Bag with window, Paper food box and so on, I hope you will enjoy it.And we offered lots of packing idea to them, so that our client could get the best packing instruction.
Look forward to have cooperation with you.
Acrylic waste water treatment has always been recognized as an environmental problem at home and abroad. It is difficult to completely remove high polymer polymers and it has always been the biggest obstacle in the treatment of acrylic fibers. In order to effectively solve this technical problem, over the years, domestic and foreign experts have put forward a number of treatment options, but it is difficult to meet the emission standards, and some even meet the emission standards, but due to the high cost, it is difficult to promote.
Anqing Petrochemical Acrylic Fiber Factory, which was put into operation earlier in the country, adopted a new process of “air floatation + sludge dewatering system and A/O biochemistry + secondary sedimentation tank treatment + aeration biological filterâ€. With increasingly stringent environmental protection requirements, Anqing Petrochemical invested more than 700 million yuan to build an acrylic fiber wastewater pretreatment plant, to a certain extent, improve the technical level of wastewater treatment of acrylic fibers and sewage treatment capacity.
According to reports, the results of this research mainly deal with the advanced treatment of acrylic fiber wastewater mainly using bio-pure oxygen aeration, A/O and other biological treatment technologies to achieve the mineralization, effective, chain breaking and opening of refractory organic components in acrylic fiber waste water. Ring effect, so as to achieve effective degradation of organic components of acrylic wastewater.
Experts believe that if this research achievement is market-oriented, its economic and social benefits are very significant. Firstly, it will enable enterprises to break away from the pressure of environmental protection and achieve substantial cleaner production. Second, it can save a lot of water resources. The output of tons of acrylic fiber products can reach 20 tons, and the annual total discharge volume can reach over 1 million tons. All can realize the recycling of water resources; once again, significant economic benefits can save a lot of sewage charges.
It is reported that Daqing Petrochemical has already begun to demonstrate the industrial production process of this sewage treatment technology.
Memo cube high quality,low MOQ,factory price,good service,custom size logo accepted,external packaging can also be customized according to guest needs.
This kind of post it notes/sticky notes for promotion is customizable in our factory.
1. One-step service without any outsourcingWe definitely produce all goods by ourselves, and banned for allowing any outsourcing production from other factories. It is the 1 step service from printing, surface disposal, material die-cutting, craftsmanship, QC, packing, and delivery, therefore quality is 100% assured.
2. Best material selection.
All of our goods are by use of best material from the best suppliers.
3. After sales service provide
Besides, service after sales is necessary for more understanding for your needs, we do keep a close concern.
4. Flexible quantity
If you bid is ok for both parties. We could accept any quantity, of course, we like the big quantity, as the larger quantity, the lower price and we have the ability for big order.
Repeat again: We could offer different material (paper, PVC PET and so on) or instruction (simple or complex) of packaging which with printing (or logos) on it, we welcome client to offer their design drawing to us and discuss with us.We make many high-quality paper products as well, such as: kraft paper bags,art paper bags,Kraft Paper Bag with window, Paper food box and so on, I hope you will enjoy it.And we offered lots of packing idea to them, so that our client could get the best packing instruction.
Look forward to have cooperation with you.
Memo Cube,Memo Cube Paper,Rainbow Memo Cube,Memo Note Cube
JIANGYIN SMART IMPORT & EXPORT CO.,LTD , https://www.jiangyinsmart.com