Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40C (-40F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Details of advantages
Innovative structure with patents,employs small desiccant chamber unit
1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control
Structure and operation
Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration
Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Technical data
| MODEL | Port (inch) | Flow rate (m³/min) | Dimension (mm) | ||||
| @5~6bar | @6~7bar | @7~10bar | L | W | H | ||
| BTGMXW065-B | G2 | 4.8 | 5.8 | 6.5 | 451 | 240 | 1628 |
| BTGMXW085-B | G2 | 6 | 7.4 | 8.5 | 560 | 240 | 1628 |
| BTGMXW106-B | G2 | 7.4 | 9.1 | 10.6 | 668 | 240 | 1628 |
| BTGMXW146-B | G2 | 9.8 | 12 | 14.6 | 885 | 240 | 1628 |
| BTGMXW165-B | G2 | 11.6 | 14.2 | 16.5 | 994 | 240 | 1628 |
| BTGMXW206-B | G3 | 14.6 | 17.8 | 20.6 | 763 | 480 | 1628 |
| BTGMXW248-B | G3 | 16.7 | 20.5 | 24.8 | 794 | 480 | 1628 |
| BTGMXW295-B | G3 | 21.5 | 26.3 | 29.5 | 903 | 480 | 1628 |
| BTGMXW336-B | G3 | 24.1 | 29.5 | 33.6 | 1012 | 480 | 1628 |
| BTGMXW385-B | G3 | 26.8 | 32.8 | 38.5 | 1121 | 480 | 1628 |
| BTGMXW425-B | G3 | 29.7 | 36.4 | 42.5 | 1230 | 480 | 1628 |
| BTGMXW465-B | G4 | 32.7 | 40.1 | 46.5 | 1339 | 480 | 1628 |
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air≤5%
         Pressure drop≤0.012MP
         Noise≤75dB(average);
Â
Â
B-series         Heat            (-40ºC dew point)
| MODEL | Port (inch) | Flow rate (m³/min) | Dimension (mm) | Max Power | ||||
| @5~6bar | @6~7bar | @7~10bar | L | W | H | Kw/1 Ph | ||
| BTGMXD065-B | G2 | 4.8 | 5.8 | 6.5 | 451 | 240 | 1628 | 0.8 |
| BTGMXD085-B | G2 | 6 | 7.4 | 8.5 | 560 | 240 | 1628 | 1 |
| BTGMXD106-B | G2 | 7.4 | 9.1 | 10.6 | 668 | 240 | 1628 | 1 |
| BTGMXD146-B | G2 | 9.8 | 12 | 14.6 | 885 | 240 | 1628 | 1.4 |
| BTGMXD165-B | G2 | 11.6 | 14.2 | 16.5 | 994 | 240 | 1628 | 1.6 |
| BTGMXD206-B | G3 | 14.6 | 17.8 | 20.6 | 763 | 480 | 1628 | 2 |
| BTGMXD248-B | G3 | 16.7 | 20.5 | 24.8 | 794 | 480 | 1628 | 2.4 |
| BTGMXD295-B | G3 | 21.5 | 26.3 | 29.5 | 903 | 480 | 1628 | 2.8 |
| BTGMXD336-B | G3 | 24.1 | 29.5 | 33.6 | 1012 | 480 | 1628 | 3.2 |
| BTGMXD385-B | G3 | 26.8 | 32.8 | 38.5 | 1121 | 480 | 1628 | 3.6 |
| BTGMXD425-B | G3 | 29.7 | 36.4 | 42.5 | 1230 | 480 | 1628 | 4 |
| BTGMXD465-B | G4 | 32.7 | 40.1 | 46.5 | 1339 | 480 | 1628 | 4.4 |
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air: ≤2%
         Pressure drop≤0.012MP
         Noise≤75dB(average); Mechanical Bar Screen
Mechanical Bar Screen
Mechanical Bar Screen is provided with several special-shaped teeth which are assembled on the teeth axis based on certain ordering, forming the sealed teeth chain. The lower part is installed in the water inlet. If the chain wheel rotates directionally with even speed, the whole rake chain will move accordingly. Under such circumstance, the solid sundries attached on the tooth will be separated from liquid and the fluid will low away through the gap. When rake chain arrives at its upper end, each group of rakes will carry on self cleaning by dropping out most of the solid material under gravity and guideline rail, while the rest of the solid will be tidied clean by back running brush.The whole process is carried out continuously and automatically so as to achieve the goal of solid-liquid separation.
Mechanical Bar Screen,Bar Screen,Coarse Bar Screen,Sewage Bar Screen,Wastewater Bar Screen
YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatment-machine.com