Electronic scales often have large and small problems. When electronic scales show problems, we immediately think of weighing instruments. However, because there are many parts related to weighing instruments, we do not know what to do. In fact, when encountering electronic floor scales are not normal or even after booting, we need to do not worry, but analyze the product's possibility of error and find out where to make mistakes based on the actual situation.
(1) After the power is turned on, the electronic scale weighing instrument does not respond.
Solution: Check carefully whether the power cable is in good condition, and if the weighing instrument cable is in good condition, replace the damaged cable and replace it immediately.
(2) When the electronic scale is opened, the weighing indicator shows numbers and there is no regular jump.
Solution: In this type of problem, consider that the junction box is too heavy and should be blown with a hair dryer.
(3) Weighing results are light or heavy after normal boot.
Solution: Recalibrate the electronic scales according to the instruction manual. If the problem is still not resolved after calibration, consider that the sensor has been damaged.
(4) The figure displayed by the weighing instrument is not stable when weighing.
Solution: Check whether the weighbridge is in the horizontal plane and readjust its position.
(5) After the weighing is completed, the weighing object is removed and the weighing instrument is not returned to zero.
Solution: The above situation should be that the signal is attenuated due to line breakage. Look carefully at the electronic scale data line for damage. If so, replace it promptly. ??
CNC Upper Exchange Nozzle
CNC Exchange Nozzle is divided into exchang Upper Nozzle and exchange lower nozzle,which saves the operation time and improves the efficiency of steelmaking . This Upper Exchange Nozzle is inlaid at the bottom of the tundish, and the service life of the tundish is the same and they complement each other.
Anyang Jinrong Company is a professional manufacturer of refractory materials,mainly produce Zirconia Insert , Zirconia Tundish Nozzle ,Tundish Upper Nozzle,Tundish Lower Nozzle, Tundish Well Block ,Submerged Entry Nozzle,Ladle Nozzle,Ladle Upper Nozzle, Ladle Lower Nozzle, Ladle Slide Gate Plate,Porous Plug.Over the past 28 years, our company have become a leading refractory manufacturer at home and abroad.
Perfect business philosophy and strong production equipment, make the company become stronger.All the staff have established the ANYANG JINRONG brand with the supremacy of integrity,excellent quality and service, made outstanding contributions to the development of iron and steel industry in China and even in the word .
CNC upper exchange nozzle,tundish upper nozzle,tundish nozzle with insert
ANYANG JINRONG METALLURGICAL MATERIALS CO.,LTD , https://www.ladlenozzle.com