(1) Effect:
It is used in the line and substation construction to prevent safety caused by electrostatic induction or electric shocks caused by nearby charged objects.
(2) Structure:
The portable short-circuit ground wire consists of insulated operating rods, wire clips, short-circuit wires, grounding wire, grounding oscilloscope, bus clips, and grounding clips.
(3) Production process:
Wire clamps and grounding clamps are made of high quality aluminum alloy die-casting; the operating rods are epoxy resin color tubes, which have good insulation properties, high strength, light weight, bright colors and smooth appearance; ground soft copper wires are made of high quality soft copper wire. They are combined together and covered with a soft, high-temperature resistant transparent insulation layer to prevent the wear of the grounding copper wire during use. The copper wire meets the fatigue test requirements to ensure the operator's safety in operation.
Second, the hook type three-phase short-circuit grounding wire Technical requirements:
1. Nominal section: 35mm2
2. Total number of roots: 1136
3. Average diameter (mm): 0.2mm
4. Calculation section: (mm2): 35.67
5. Insulation rod part length: 1360mm
6. Handshake length: 700mm
Second, 110KV ground wire classification and brief description (1) flat mouth screw compact type ground wire JDX-NL-110KV
Brief description:
Product Specifications: JDX-NL-110KV Grounding Wire Product Type: Helical Pressed Grounding Wire Range of use: 110KV indoor busbar, change the power busbar to connect the clamp type: aluminum flat screw clamp type clamp clamp specifications : The opening distance of the clamp is 35mm, and the maximum opening distance is 130mm
Applicable voltage level: 110KV
(2) Hand-held grounding cable JDX-NS-110KV
Brief description:
Product Specifications: JDX-NS-110KV Grounding Wire Product Type: Hand-held grounding wire Range of use: 110KV indoor busbars, electric busbars to change the electric clamp type: Hand-held aluminum flat-pressed clamps and clamps Specifications : The opening distance of the clamp is 35mm, and the maximum opening distance is 130mm
Applicable voltage level: 110KV
(3) Round Spiral Compression Ground Wire JDX-WL-110KV
Brief description:
Product Specifications: JDX-WL-110KV Grounding Wire Product Type: Line hook type grounding line 110KV outdoor line, substation line with electric clamp type: Round screw-type crimping clamp Specifications: connecting clamp opening distance 35mm, the largest Opening distance 65mm
Applicable voltage level: 110KV
(4) Line hook type ground wire JDX-WS-110KV
Brief description:
Product Specifications: JDX-WS-110KV Grounding Wire Product Type: Line-hook grounding wire Range of use: 110KV outdoor line, substation line with electric clamp Type: double spring bayonet type clamp Specifications: Connect the clamp opening distance 35mm, The largest opening distance 130mm
Applicable voltage level: 110KV
7. Metal connector part length: 140mm
8. Number of Sections: 2
9. Rod diameter: 30mm
10. Total length (excluding clamps): 2200mm
Third, the use and maintenance of 10KV grounding wire 1. Care for the ground wire. The grounding wire must not be twisted during use. When not in use, the soft copper wire should be properly grounded. After the grounding wire is dismantled, it must not be dropped from the air or thrown anywhere. It must be transported by means of a rope. Pay attention to the cleanliness of the grounding line and prevent mud. The sand and debris enter the pores of the grounding device and affect the normal use of the parts.
2. The grounding wire should be stored in a dry room. It should be kept in a designated place, stored, maintained, numbered, and checked regularly. Should pay attention to the quality of the grounding line inspection, observe the appearance of corrosion, wear, excessive oxidation, aging and other phenomena, so as not to affect the use of the ground wire.
It is used in the line and substation construction to prevent safety caused by electrostatic induction or electric shocks caused by nearby charged objects.
(2) Structure:
The portable short-circuit ground wire consists of insulated operating rods, wire clips, short-circuit wires, grounding wire, grounding oscilloscope, bus clips, and grounding clips.
(3) Production process:
Wire clamps and grounding clamps are made of high quality aluminum alloy die-casting; the operating rods are epoxy resin color tubes, which have good insulation properties, high strength, light weight, bright colors and smooth appearance; ground soft copper wires are made of high quality soft copper wire. They are combined together and covered with a soft, high-temperature resistant transparent insulation layer to prevent the wear of the grounding copper wire during use. The copper wire meets the fatigue test requirements to ensure the operator's safety in operation.
Second, the hook type three-phase short-circuit grounding wire Technical requirements:
1. Nominal section: 35mm2
2. Total number of roots: 1136
3. Average diameter (mm): 0.2mm
4. Calculation section: (mm2): 35.67
5. Insulation rod part length: 1360mm
6. Handshake length: 700mm
Second, 110KV ground wire classification and brief description (1) flat mouth screw compact type ground wire JDX-NL-110KV
Brief description:
Product Specifications: JDX-NL-110KV Grounding Wire Product Type: Helical Pressed Grounding Wire Range of use: 110KV indoor busbar, change the power busbar to connect the clamp type: aluminum flat screw clamp type clamp clamp specifications : The opening distance of the clamp is 35mm, and the maximum opening distance is 130mm
Applicable voltage level: 110KV
(2) Hand-held grounding cable JDX-NS-110KV
Brief description:
Product Specifications: JDX-NS-110KV Grounding Wire Product Type: Hand-held grounding wire Range of use: 110KV indoor busbars, electric busbars to change the electric clamp type: Hand-held aluminum flat-pressed clamps and clamps Specifications : The opening distance of the clamp is 35mm, and the maximum opening distance is 130mm
Applicable voltage level: 110KV
(3) Round Spiral Compression Ground Wire JDX-WL-110KV
Brief description:
Product Specifications: JDX-WL-110KV Grounding Wire Product Type: Line hook type grounding line 110KV outdoor line, substation line with electric clamp type: Round screw-type crimping clamp Specifications: connecting clamp opening distance 35mm, the largest Opening distance 65mm
Applicable voltage level: 110KV
(4) Line hook type ground wire JDX-WS-110KV
Brief description:
Product Specifications: JDX-WS-110KV Grounding Wire Product Type: Line-hook grounding wire Range of use: 110KV outdoor line, substation line with electric clamp Type: double spring bayonet type clamp Specifications: Connect the clamp opening distance 35mm, The largest opening distance 130mm
Applicable voltage level: 110KV
7. Metal connector part length: 140mm
8. Number of Sections: 2
9. Rod diameter: 30mm
10. Total length (excluding clamps): 2200mm
Third, the use and maintenance of 10KV grounding wire 1. Care for the ground wire. The grounding wire must not be twisted during use. When not in use, the soft copper wire should be properly grounded. After the grounding wire is dismantled, it must not be dropped from the air or thrown anywhere. It must be transported by means of a rope. Pay attention to the cleanliness of the grounding line and prevent mud. The sand and debris enter the pores of the grounding device and affect the normal use of the parts.
2. The grounding wire should be stored in a dry room. It should be kept in a designated place, stored, maintained, numbered, and checked regularly. Should pay attention to the quality of the grounding line inspection, observe the appearance of corrosion, wear, excessive oxidation, aging and other phenomena, so as not to affect the use of the ground wire.
Low Temperature Infrared Pyrometer
Low Temperature Infrared Pyrometer,Infrared Pyrometer,Temperature Measurment Infrared Pyrometer,Infrared Thermometer Accuracy
Changzhou Sijie Optoelectronics Technology Co.,Ltd. , https://www.sjinfrared.com