1. It can be customized according to the width of materials to be cut to meet different production requirements of customers.
2. The driving part adopts the mechanism of precise four-column and double oil cylinder automatic
Balancing connection rod, which can make the cutting knife move upwards and downwards with High cutting force and stable movement.
3. The feeding mechanism adopts twin-roller type stepping feeding to realize free cutting for materials with the length more than or equal to 40mm.
4. The computer automatically controls the feeding distance and cutting, and the material is conveyed and taken by the anti-deviation adhesive tape of the material output worktable. The feeding is accurate and the production efficiency is very high.
5. The edge cutting spindle and round knife driving power high-speed edge cutting system is adopted to realize high and low speed adjustment, cutting width adjustment and etc.
6. The infrared scanning light curtain and protective cover are used for the safety protective device.
Technical specification
Ethylene Cracking Furnace Anchor
Anchors are mostly used as fixtures for integral linings (castable, plastic and sprayable linings). Refractory brick linings also use anchors, but they are not used in many occasions. Metal anchors are usually used to support and fix thin or heat-insulating integral linings, such as chimney linings, wear-resistant linings of petrochemical catalytic cracking reactors (usually tortoise shell mesh anchors), integral jet metallurgy The lining of the spray gun, the overall lining of the immersion pipe of the DH and RH vacuum degassing devices, the lining of the rotary kiln discharge day, the feeding port, etc. Metal anchors are mostly used to fix linings with a long-term use temperature below 1200 °C, or short-term use temperature above 1200 °C that can be used intermittently. Ceramic anchors are usually used to fix thicker (greater than 200mm) integral linings and are characterized by:
(1) It can withstand higher operating temperatures, and is generally used in the lining of kilns that are used for a long time above 1200 °C;
(2) It can withstand the erosion and corrosion of corrosive atmosphere;
(3) It can be extended to the working surface to reduce the peeling of the overall lining;
(4) Compared with metal anchors, the contact area with the refractory lining is large, so it has a greater supporting capacity;
(5) The thermal expansion coefficient is equivalent to that of the overall refractory material, which can eliminate the cracking or peeling of the lining due to thermal expansion mismatch
Ethylene Cracking Furnace Anchor,Corbel Anchor,601 Inconel Refractory Anchor,310 Stainless Steel Refractory Anchor
Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com