- Usage: Bus
- Emission Standard: Euro4
- Seats: 41~60
- Fuel: Diesel
- Size: Bus
- Trademark: SEENWON
- Specification: 10990X2500X3650mm
- Structure: Low Floor Bus
- Transmission Type: Manual
- Max Speed: 71-90km/h
- Steering Position: LHD
- Intelligence: NBT
- Transport Package: Nude Package by Sea Shipping
- Origin: Shanghai
Â
| ITEM | SW6109CE | |
| DIMENSION | LENGTHWIDTHHEIGHT(MM) | 10990X2500X3650 |
| Tread F (MM) | 1917 | |
| Tread R (MM) | 1800 | |
| WHEELBASE (MM) | 4500 | |
| WEIGHT | TOTAL MASS (KG) | 12000 |
| PERFORMANCE | MIN. VEHICLE TURNING CIRCLE (M) | 16512 |
| MAX. SPEED (KM/H) | 105 | |
| /ANGLE (APP/DEP)Â | 13/10 | |
| Max SEAT CAPACITY | 48-52 seats /62 seats(3+2 layout) | |
| FRAMEWORK | STRAIGHT BEAM | |
| ENGINE | MODEL |
EURO 2 CUMMINS ENGINE EQB210-20/155KW EURO 2 YC6J210-20/155KW EURO 3 CUMMINS ENGINE ISDE 210-30/155KW EURO 3 YC6J200-30/147KW EURO 3 YC6J220-30/162KW EURO 3 YC6J230-30/170KW |
| TYPE | 66 CYLINDER IN-LINE | |
| RATED-POWER (KW/R/MIN) | 170KW/155KW | |
| MAX. TORQUE (N.M) | 730 | |
| EMISSION STANDARD | 2EURO II/3EURO III | |
| FUEL TYPE | DIESEL | |
| CLUTCH | TYPE | SINGLE PLATE DRY CLUCH |
| CLUTCH BOOST | WITHÂ PUMP | |
| TRANSMISSION | MODEL | ZF TECHNOLOGY QIJIANG |
| MAX. TORQUE | 730 | |
| SHIFTS | 6 SPEED MANUAL | |
| CONTROL SYSTEMS | FLEXIBLEÂ SHAFT | |
| FRONT AXLE | 4.5T | |
| REAR AXLE | 8.0T | |
| BRAKING SYSTEM | STEERING | POWER STEERING |
| SERVICE BRAKE | DUAL-CIRCUIT AIR BRAKING SYSTEM | |
| PARKING BRAKE | Diaphragm spring brake | |
| F/R BRAKING DIA. | 400 | |
| F/R BRAKING SHOE Width | 130/155 | |
| SUSPENSION STYLE | STEEL LEAF SPRING | |
| TYRE | 9.00-20 | |
| OIL TANK CAPACITY | 140L | |
Normalized steel bar is produced by normalizing which is one kind of heat treatment to get even microstructure and better mechanical properties and hardness. Our advantages and more services of normalized steel bar includes:
1) Wide range of diameters from 10mm to 100mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.5um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
Normalized Steel Bar,Normalized Steel Round Bar,Normalized steel Rod,Normalized Square Steel Bar,Normalized Steel
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdcolddrawnsteelbar.com