QBY series of pneumatic diaphragm pump is a new type of conveying machinery, is currently the most novel kind of pump. The use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid can be smoked exhausted. Its performance parameters and the Federal Republic of Germany WLLDENPVMPS, the United States MARIOWPUMPS similar.
At present, a series of production has been formed, a total of eight specifications Diameter: φ10mm (3/8 ""), φ15mm (1/2 ""), φ25mm (1 ""), φ40mm (11/2 " ""), Φ65mm (21/2 ""), φ80mm (3 ""), φ100mm (4 ""). Four materials: plastic, aluminum, cast iron, stainless steel. Diaphragm pumps are based on different liquid medium were nitrile rubber, neoprene, fluorine rubber, PTFE, polyhexamethylene. To meet the needs of different users.
Since the pump was put into operation, the pump has been adopted by more than a thousand domestic petroleum, chemical, electronic, ceramic and textile system units and placed in various special occasions for pumping and pumping the medium that can not be sucked by a conventional pump, Satisfied with the results.
ã€The main purpose】
Pumping peanut butter, pickles, mashed potatoes, sausage, jam apple pulp, chocolate and so on.
Pump paint, gums, pigments.
Adhesives and glues, all types available pump suction.
Various tiles, porcelain, brick and pottery glaze.
After the well is drilled, pump sediment and grout.
Pumps various emulsifiers and fillers.
Pump all kinds of sewage pumping.
Pump for tanker, barge clearance to absorb the warehouse water.
Hops and baking powder slurry, syrup, molasses.
Pumping mine, tunnels, tunnels, mineral processing, slag in the water.
Pumping cement grouting and mortar, all kinds of rubber pulp.
A variety of abrasive, etchant, oil and mud, cleaning grease and general containers.
A variety of highly toxic, flammable, volatile liquid.
A variety of acid, alkali, strong corrosive liquid.
A variety of high temperature liquid up to 150 ℃.
As a variety of solid-liquid separation equipment before the pressure delivery device.
QBY pneumatic diaphragm pumps can not only pump liquid but also transport some non-flowable media. There are many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump. 1, do not need irrigation, suction up to 7m, lift up to 50m, the outlet pressure of not less than 6kgf per square centimeter. 2, flow-wide, through the good performance, allowing the largest particles. Diameter of 10mm pumping mud, impurities, minimal wear on the pump. 3, head, flow through the valve opening to achieve stepless adjustment. (Air pressure regulation 2-8kg / cm2) 4, the pump without rotating parts, will not cause environmental pollution and endanger personal safety. 5, no electricity, safe and reliable in flammable and explosive places. 6, can be immersed in the media work. 8, the structure is simple, vulnerable parts Note, the pump structure is simple, easy installation and maintenance, 9, can transport a more viscous liquid. (Viscosity below 10,000 cps) 10, the pump without oil lubrication, even idle, the pump has no effect, which is a major feature of the pump.
Main application areas and fluids suitable for handling
Chemical industry: acid, alkali, solvents, suspended solids, dispersed system.
Petrochemical industry: crude oil, heavy oil, grease, mud, sludge and so on.
Coatings industry: resins, solvents, colorants, paints and so on.
Daily chemical industry: detergents, shampoo, emulsion, emulsion, hand cream, surfactant.
Ceramics industry: mud, porcelain paste, lime slurry, clay slurry.
Mining industry: coal slurry, magma, mud, mortar, explosive slurry, lubricants and so on.
Water treatment: stone mortar, soft sediment, sewage, chemicals, waste water.
Food industry: liquid semi-solid, chocolate, salt water, vinegar, syrup, vegetable oil, soybean oil, honey, animal blood.
Beverages: Yeast, syrup, concentrates, gas-liquid mixtures, wine, fruit juices, corn syrup and more.
Pharmaceutical industry: solvents, acids, alkalis, plant extracts, ointment, plasma and other pharmaceutical materials liquid.
Paper industry: adhesives, resins, paints, inks, pigments, hydrogen peroxide and so on.
Electronics industry: solvents, plating solution, cleaning solution, sulfuric acid, nitric acid, waste acid, corrosive acid, polishing solution.
Textile industry: dye chemicals, resins, adhesives and so on.
Construction industry: grout, ceramic tile binder, rock slurry, ceiling finish, etc.
Automotive: Polishing Emulsion, Oil, Coolant, Automotive Primer, Oil Latex, Varnish, Varnish Additives, Degreasing Fluid, Paint and more.
Furniture industry: adhesives, varnishes, dispersions, solvents, toner, white wood glue, epoxy resin, starch binder.
Metallurgy, casting and dyeing industry: metal pulp, hydroxide and carbonized pulp, dust washing pulp.
At present, a series of production has been formed, a total of eight specifications Diameter: φ10mm (3/8 ""), φ15mm (1/2 ""), φ25mm (1 ""), φ40mm (11/2 " ""), Φ65mm (21/2 ""), φ80mm (3 ""), φ100mm (4 ""). Four materials: plastic, aluminum, cast iron, stainless steel. Diaphragm pumps are based on different liquid medium were nitrile rubber, neoprene, fluorine rubber, PTFE, polyhexamethylene. To meet the needs of different users.
Since the pump was put into operation, the pump has been adopted by more than a thousand domestic petroleum, chemical, electronic, ceramic and textile system units and placed in various special occasions for pumping and pumping the medium that can not be sucked by a conventional pump, Satisfied with the results.
ã€The main purpose】
Pumping peanut butter, pickles, mashed potatoes, sausage, jam apple pulp, chocolate and so on.
Pump paint, gums, pigments.
Adhesives and glues, all types available pump suction.
Various tiles, porcelain, brick and pottery glaze.
After the well is drilled, pump sediment and grout.
Pumps various emulsifiers and fillers.
Pump all kinds of sewage pumping.
Pump for tanker, barge clearance to absorb the warehouse water.
Hops and baking powder slurry, syrup, molasses.
Pumping mine, tunnels, tunnels, mineral processing, slag in the water.
Pumping cement grouting and mortar, all kinds of rubber pulp.
A variety of abrasive, etchant, oil and mud, cleaning grease and general containers.
A variety of highly toxic, flammable, volatile liquid.
A variety of acid, alkali, strong corrosive liquid.
A variety of high temperature liquid up to 150 ℃.
As a variety of solid-liquid separation equipment before the pressure delivery device.
QBY pneumatic diaphragm pumps can not only pump liquid but also transport some non-flowable media. There are many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump. 1, do not need irrigation, suction up to 7m, lift up to 50m, the outlet pressure of not less than 6kgf per square centimeter. 2, flow-wide, through the good performance, allowing the largest particles. Diameter of 10mm pumping mud, impurities, minimal wear on the pump. 3, head, flow through the valve opening to achieve stepless adjustment. (Air pressure regulation 2-8kg / cm2) 4, the pump without rotating parts, will not cause environmental pollution and endanger personal safety. 5, no electricity, safe and reliable in flammable and explosive places. 6, can be immersed in the media work. 8, the structure is simple, vulnerable parts Note, the pump structure is simple, easy installation and maintenance, 9, can transport a more viscous liquid. (Viscosity below 10,000 cps) 10, the pump without oil lubrication, even idle, the pump has no effect, which is a major feature of the pump.
Main application areas and fluids suitable for handling
Chemical industry: acid, alkali, solvents, suspended solids, dispersed system.
Petrochemical industry: crude oil, heavy oil, grease, mud, sludge and so on.
Coatings industry: resins, solvents, colorants, paints and so on.
Daily chemical industry: detergents, shampoo, emulsion, emulsion, hand cream, surfactant.
Ceramics industry: mud, porcelain paste, lime slurry, clay slurry.
Mining industry: coal slurry, magma, mud, mortar, explosive slurry, lubricants and so on.
Water treatment: stone mortar, soft sediment, sewage, chemicals, waste water.
Food industry: liquid semi-solid, chocolate, salt water, vinegar, syrup, vegetable oil, soybean oil, honey, animal blood.
Beverages: Yeast, syrup, concentrates, gas-liquid mixtures, wine, fruit juices, corn syrup and more.
Pharmaceutical industry: solvents, acids, alkalis, plant extracts, ointment, plasma and other pharmaceutical materials liquid.
Paper industry: adhesives, resins, paints, inks, pigments, hydrogen peroxide and so on.
Electronics industry: solvents, plating solution, cleaning solution, sulfuric acid, nitric acid, waste acid, corrosive acid, polishing solution.
Textile industry: dye chemicals, resins, adhesives and so on.
Construction industry: grout, ceramic tile binder, rock slurry, ceiling finish, etc.
Automotive: Polishing Emulsion, Oil, Coolant, Automotive Primer, Oil Latex, Varnish, Varnish Additives, Degreasing Fluid, Paint and more.
Furniture industry: adhesives, varnishes, dispersions, solvents, toner, white wood glue, epoxy resin, starch binder.
Metallurgy, casting and dyeing industry: metal pulp, hydroxide and carbonized pulp, dust washing pulp.
Dream tech focuses on the smart home appliance industry. The company has four major categories: wireless vacuum cleaners, robots vacuum, high-speed hair dryers, and floor scrubbers, and continues to expand in personal care, life and other fields. Its first product, the wireless vacuum cleaner V9, was launched on Xiaomi Youpin crowdfunding in 2018. In March of the following year, it logged on to overseas e-commerce platforms such as AliExpress, eBay, and Amazon, officially opening the global channel layout, covering China , the United States, France, Poland and more than 100 countries.
Dreame Robot Vacuum Cleaners,Vacuum Robot Vacuum Battery,Robot Vacuum Cleaner With Mop,Voice Control Robot Vacuums Cleaner
Guangxi Nanning King Green Smart Co., Ltd. , https://www.smartliferobot.com