Step time to determine the current water control in the implementation of the operation or regeneration of water treatment, due to the lack of online testing means that each process step time required by repeated tests to determine the results obtained. Step time can be based on changes in the process of operation, through the host computer to modify.
Analysis of analytical instruments The analytical instrument is the visual nerve of the system, the calibration of analytical instruments should be taken seriously, each instrument should be verified before put into use. Whether the failure of the bed operation mainly depends on the measurement results of the analytical instruments. Before the operation and control system is put into operation, it is necessary to ensure that the measurement results are accurate and reliable. In addition, the bed operation failure, pay attention to close the sampling of the analysis instrument once the door to protect the instrument sensor from acid-base corrosion.
Analysis of the instrument signal output problems The operation of water treatment is random furnace to supplement the water demand may be, water treatment outage or regeneration, the flow of analytical instruments may occur within the flow of water, pollution and other phenomena, yang sodium table, anion bed conductivity Instrument detection signal and program control interlock, when the bed is put into operation again, it may lead to program-controlled malfunction or can not be started automatically.
Fiber Laser Cutting Metal Sheet
Laser cutting is a process where a material is cut through the use of a laser beam. This can be for small & fine materials or materials with a much greater level of thickness (e.g. metal sheets). The process simply involves the use of a focused laser beam (e.g. pulsed or continuous wave) to cut a wide range of materials to a high level of accuracy, using a process, which is highly repeatable.
The right laser cutting system for every requirement – from versatile fiber Laser Cutting Machines in a range of formats and capacities capable of processing thin to thick ferrous and non-ferrous materials to high production Laser Tube Cutting Machines, all with performance-enhancing options, as well as laser automation.
Cnc Laser Cutting,Sheet Metal Laser Cutting,Fiber Lasers,Cnc Laser, Cnc Fiber Laser,Laser Cutting Machine
JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncxuanlin.com