The three-wheel suction truck is a dump-type vehicle. It is the main tool for towns and small businesses to deal with sewers and septic tanks. Using the working principle of the vacuum pump, the use of a three-wheel suction truck has brought great help to the work of the sanitation workers. However, how should such a machine for cleaning metabolites be cleaned? Below, Xiao Bian took everyone to learn about the cleaning tips of the two models.
The first point is that the water used for cleaning must be clean water, because the sewage carrying fine sand will cause certain wear and tear on the machine.
The second point of attention when cleaning the suction truck is the frequency of cleaning. General requirements must not be too severe, and they will damage the vehicle paint. If you encounter the use of vehicles in the summer, it is best not to wash your car immediately after use, so as to avoid damage to its starting vehicle. The correct way is to wait for the engine to cool before cleaning.
The third cleaning point is waterproof work. Although it is a suction truck, but not all parts can meet the water, such as speakers, lights and other parts, must be done when cleaning the waterproof work to prevent damage.
The fourth point of attention is for placement after cleaning. Xiao Bian suggests placing it in a cool and ventilated place. This not only can prevent the sun from damaging the machine, but also can make the work more convenient.
When we wipe the machine, we'd better use a special clean towel, which is to avoid the normal rough towel damage to the machine.
The above five points are the main cleaning precautions for the three-wheel suction truck . In the summer, many vehicles are naturally in a state of unconsciousness. Therefore, when we clean vehicles, we will also take safety measures, turn off the power supply, and do a good job of protecting the machine from damage. Being familiar with these little common sense points can effectively reduce many of our daily mistakes that could have been avoided. Some seemingly simple tricks, if done well, will provide good protection for the vehicle, while neglect will cause invisible harm.
Couplings are used to connect two joints of TUBING coupling or CASING pipe together.
Couplings are short length of heavy wall pipe with the same threads on each end.
EASTSUN manufactures tubing coupling and casing tubing coupling strictly comply with API 5CT latest standard.
The steel coupling is mainly used to connect oil pipes in pil drilling.
This product can be used to connect the shafts of units that are
manufactured separately.
It can fit the misalignment of the shafts or introduce mechanical flexibility.
The pipe coupling is capable of reducing the transmission of shock losds from one shaft to another.
It can also introduce protecyion against overloads.
The steel coupling can be used to alter vibration characteristics of
rotating units.
Pipe coupling is also used to connect drilling par and driven part.
|
Size |
Grade |
NUE |
EUE |
Special clearance |
|
2 3/8" |
J55/K55/M80/L80/P110 |
Yes |
Yes |
Yes |
|
2 7/8" |
J55/K55/M80/L80/P110 |
Yes |
Yes |
Yes |
|
3 1/2" |
J55/K55/M80/L80/P110 |
Yes |
Yes |
Yes |
|
4" |
J55/K55/M80/L80/P110 |
Yes |
Yes |
|
|
4 1/2" |
J55/K55/M80/L80/P110 |
Yes |
Yes |
|
Tubing Coupling Scheme,Api Coupling,Eue Coupling,Api Line Couplings
ESASTSUN OILFIELD EQUIPMENT MANUFACTURING (CAMBODIA) CO., LTD , https://www.eastsuncambodia.com