The National Energy Administration revealed at a press conference held recently that China will achieve a total installed capacity of 35 million kilowatts by the end of 2010. In this regard, Wu Hao, deputy director of the National Energy Administration, said that the actual installed capacity may exceed this figure, but he did not give a specific forecast. In contrast, the US wind power industry in 2010 is not optimistic. According to a report previously released by Bloomberg New Energy Finance (BNEF), it is expected that the installed capacity of wind turbines in the US will decline by 39% year-on-year in 2010. By the end of 2010, the total installed capacity of wind turbines in China surpassed the United States and became the world's largest.
According to the statistics of the Wind Energy Professional Committee of the China Renewable Energy Association, China's newly installed capacity of wind turbines was 13.803 million kilowatts in 2009, an increase of 124% year-on-year; the cumulative figure was 25.8053 million kilowatts, an increase of 114% year-on-year. According to the above official figures, a conservative estimate of 10 million kilowatts of installed capacity for wind turbines in 2010 was slightly lower than the 13.839 million kilowatts newly installed in 2009, but the growth rate is still alarming.
“Wind and Ebbing†Chinese Wind Power
Although it is estimated that the growth rate of installed capacity of wind turbines in 2010 will be slower than that in 2009, the installed capacity of 10 million kilowatts is only a conservative estimate and the actual growth is far more than this. After a year of construction, China has also achieved gratifying achievements not only in the installed capacity of wind turbines, but also in the construction of wind power bases, R&D of wind turbines, development of wind power companies, and integration of wind power.
Inventory One: Seven Bases Included in the Plan
In 2010, China's wind power industry is particularly eye-catching is the planning and development of 10 million kilowatts of wind power base construction.
According to the draft of the “New Energy Industry Revitalization Plan†of the country, China will build 7 million kilowatt-class wind power bases in the six provinces and regions of Gansu, Xinjiang, Hebei, Jilin, Inner Mongolia and Jiangsu. The National Energy Administration has confirmed the plans for 10 million kilowatts of wind power bases. After ensuring that the planned 10 million kilowatt-class wind power bases are completed, China will have an installed capacity of over 100 million kilowatts by 2020.
According to the national grid plan, the domestic 7 million kilowatts of wind power bases will be completed in 2020. It is estimated that 58.08 million kilowatts will be built in 2015 and 90.17 million kilowatts will be built in 2020, accounting for about 60% of the total installed capacity of wind power in the country.
Inventory 2: Fan supplier "scenery is still the same"
Wind power industry planning in 2010 not only led to the construction of wind power bases, but also drew the appetite of Chinese wind turbine suppliers. In 2009, three major Chinese wind turbine suppliers, Huarui Wind Power [74.20-0.51%], Goldwind [20.53-0.92%] and Dongfang Electric [35.59 0.42%] that have been squeezed into the top ten wind turbine suppliers in the world, performed well. .
On July 6, 2010, 34 wind turbines of the 100 MW offshore wind farm demonstration project of Shanghai Donghai Bridge, the first large-scale offshore wind farm in China provided by Sinovel, were all connected to the grid for power generation. This is a milestone in the development of offshore wind power in China. . On October 12, Huarui Wind Power, with its own intellectual property rights, produced 5 MW wind turbines, which is China's first 5 MW wind turbine. At the same time, the R&D work of Sinovel Wind 6MW wind turbines has also progressed smoothly and will be rolled out in the first half of 2011. Immediately after the official launch of the 5 MW wind turbine unit, the construction of the Huarui Wind Power Wind Power Equipment Manufacturing Base started on October 16th. Huarui Wind Power Hami Wind Power Industrial Base has a total investment of 1.5 billion yuan. It is planned to be completed and put into operation in the first half of 2011. After reaching production, it will form an annual production capacity of 1.5 million kilowatts of wind turbines, achieving a production value of over 5 billion yuan; the base will be built into a set of 3 MW and 5 MW wind turbine manufacturing, sales, service, training and supply of spare parts as a modern wind power industry base.
Compared with the expansion operation of Sinovel Wind Power, Jinfeng Science and Technology is even more focused on "keeping a low profile." In September 2010, the first batch of two 1.5-MW high-altitude wind turbines independently developed by Jinfeng Technology was formally rolled out. This model product is tailored to China's “wind power virgin land†in the southwest and northwest high altitude regions and will be high Altitude segmentation market for gold wind technology to develop new growth drivers. The wind turbine generator design fully considers the special operating environment such as low air density, frequent lightning, and strong sunlight radiation in high altitude areas, and adopts advanced technologies such as increasing the number of blades, improving insulation and heat dissipation, and enhancing lightning protection and radiation resistance. A wind turbine generator product suitable for high altitude applications in China. In addition, Jinfeng Technology Group was listed on the main board of the Hong Kong Stock Exchange in October 2010, and its strength has greatly increased.
Dongfang Electric is not far behind. On October 1, 2010, Dongfang Electric's first 1.5-megawatt direct-drive wind turbine unit with independent intellectual property rights successfully carried 100 kilowatts of grid-connected power. The grid-connected power generation of Wuji's first wind power symbolizes that Dongfang Electric's direct-drive wind turbines have entered the first-line market and successfully entered the ranks of high-capacity direct-drive turbines.
There are also a few rising stars in wind power equipment suppliers. In October 2010, Zhang Chuanwei, chairman of Mingyang Wind Power, sounded the opening bell of the New York Stock Exchange and announced the successful listing of the Mingyang wind power industry in the United States.
Inventory 3: Wind power development progresses
On November 4, 2010, Gansu's 750-kilovolt network project was put into operation and the first phase of the first phase of the Jiuquan wind power base in Jiuquan was started. Gansu's 750-kilovolt network project was a major step for the State Grid Corporation of China to respond positively to the strategic deployment of the western development. The initiative is the main channel for the transmission of power from the 10 million kilowatt-class wind power bases in Jiuquan, and is the key project for the construction of power grids in the “Eleventh Five-Year Plan†period in Gansu Province.
After the project was put into operation, the network between Xinjiang Power Grid and Northwest China Power Grid was realized, which was of great significance for the promotion of energy development in Xinjiang and the realization of the “Outsourcing of Xinjiang Powerâ€. At the same time, the project also provided an outbound channel for 5.16 million kilowatts of wind power in Jiuquan, Gansu Province, which made water, fire and wind power “bundling†eastward in the northwest region a reality, which is conducive to the digestion of the northwestern region in a wider range. The green clean energy of the kilowatt-class wind power base is an important milestone in the construction of the national grid.
Inventory 4: Fans cut prices, export growth
Due to the increasing localization of wind turbines in China and lower transportation costs, the price of wind turbines has dropped from about 6,200 yuan per kilowatt in early 2008 to 4,500 yuan per kilowatt. On October 26th, 2010, the reporter learned from the "Zhangjiakou Dam Million Kilowatt-class Wind Power Base Phase II" and "Hami Xinjiang Ten Thousand Kilowatt-class Wind Power Base Southeast Wind Zone Wind Power Unit Tender Conference" that Goldwind Technology [20.56- 0.77%] reported 3,850 yuan/kW, Sinovel Wind Power Co., Ltd. [74.16-0.56%] reported a tender price of 3,983 yuan/kw. The decline in the price of Chinese wind turbines led to a significant price advantage for Chinese wind turbines in the international wind power market, to a certain extent. Promote the enhancement of China's export capacity of wind turbines.
On September 13, 2010, the first set of wind turbines made in China was exported at Luojing Port. The wind turbines shipped this time were the first set of wind turbines independently developed by China, totaling 296 tons of 25 wind turbines exported to Australia. According to industry insiders, the export of the whole set of generators indicates that China has fully grasped the manufacturing technology of wind turbines and reached world-class standards.
On September 29, 2010, Shenyang Ruixiang Wind Energy Equipment Co., Ltd. made the first 2.05 MW wind power generator set tailored for the United States from Shunde New District and became the "pioneer" of the US 600 MW wind power generating unit project.
In addition, in June 2010, CSR Zhuzhou Electric opened a offshore wind turbine production base in Dafeng, Jiangsu. The base project has a total investment of 90 million yuan and is expected to be put into production in August 2011.
Industry experts pointed out: "China's wind turbines have a price advantage, the same fans, Chinese products are 25% to 30% cheaper than foreign countries, Chinese products as long as the quality is decent, in the international arena still have a competitive advantage."
According to the statistics of the Wind Energy Professional Committee of the China Renewable Energy Association, China's newly installed capacity of wind turbines was 13.803 million kilowatts in 2009, an increase of 124% year-on-year; the cumulative figure was 25.8053 million kilowatts, an increase of 114% year-on-year. According to the above official figures, a conservative estimate of 10 million kilowatts of installed capacity for wind turbines in 2010 was slightly lower than the 13.839 million kilowatts newly installed in 2009, but the growth rate is still alarming.
“Wind and Ebbing†Chinese Wind Power
Although it is estimated that the growth rate of installed capacity of wind turbines in 2010 will be slower than that in 2009, the installed capacity of 10 million kilowatts is only a conservative estimate and the actual growth is far more than this. After a year of construction, China has also achieved gratifying achievements not only in the installed capacity of wind turbines, but also in the construction of wind power bases, R&D of wind turbines, development of wind power companies, and integration of wind power.
Inventory One: Seven Bases Included in the Plan
In 2010, China's wind power industry is particularly eye-catching is the planning and development of 10 million kilowatts of wind power base construction.
According to the draft of the “New Energy Industry Revitalization Plan†of the country, China will build 7 million kilowatt-class wind power bases in the six provinces and regions of Gansu, Xinjiang, Hebei, Jilin, Inner Mongolia and Jiangsu. The National Energy Administration has confirmed the plans for 10 million kilowatts of wind power bases. After ensuring that the planned 10 million kilowatt-class wind power bases are completed, China will have an installed capacity of over 100 million kilowatts by 2020.
According to the national grid plan, the domestic 7 million kilowatts of wind power bases will be completed in 2020. It is estimated that 58.08 million kilowatts will be built in 2015 and 90.17 million kilowatts will be built in 2020, accounting for about 60% of the total installed capacity of wind power in the country.
Inventory 2: Fan supplier "scenery is still the same"
Wind power industry planning in 2010 not only led to the construction of wind power bases, but also drew the appetite of Chinese wind turbine suppliers. In 2009, three major Chinese wind turbine suppliers, Huarui Wind Power [74.20-0.51%], Goldwind [20.53-0.92%] and Dongfang Electric [35.59 0.42%] that have been squeezed into the top ten wind turbine suppliers in the world, performed well. .
On July 6, 2010, 34 wind turbines of the 100 MW offshore wind farm demonstration project of Shanghai Donghai Bridge, the first large-scale offshore wind farm in China provided by Sinovel, were all connected to the grid for power generation. This is a milestone in the development of offshore wind power in China. . On October 12, Huarui Wind Power, with its own intellectual property rights, produced 5 MW wind turbines, which is China's first 5 MW wind turbine. At the same time, the R&D work of Sinovel Wind 6MW wind turbines has also progressed smoothly and will be rolled out in the first half of 2011. Immediately after the official launch of the 5 MW wind turbine unit, the construction of the Huarui Wind Power Wind Power Equipment Manufacturing Base started on October 16th. Huarui Wind Power Hami Wind Power Industrial Base has a total investment of 1.5 billion yuan. It is planned to be completed and put into operation in the first half of 2011. After reaching production, it will form an annual production capacity of 1.5 million kilowatts of wind turbines, achieving a production value of over 5 billion yuan; the base will be built into a set of 3 MW and 5 MW wind turbine manufacturing, sales, service, training and supply of spare parts as a modern wind power industry base.
Compared with the expansion operation of Sinovel Wind Power, Jinfeng Science and Technology is even more focused on "keeping a low profile." In September 2010, the first batch of two 1.5-MW high-altitude wind turbines independently developed by Jinfeng Technology was formally rolled out. This model product is tailored to China's “wind power virgin land†in the southwest and northwest high altitude regions and will be high Altitude segmentation market for gold wind technology to develop new growth drivers. The wind turbine generator design fully considers the special operating environment such as low air density, frequent lightning, and strong sunlight radiation in high altitude areas, and adopts advanced technologies such as increasing the number of blades, improving insulation and heat dissipation, and enhancing lightning protection and radiation resistance. A wind turbine generator product suitable for high altitude applications in China. In addition, Jinfeng Technology Group was listed on the main board of the Hong Kong Stock Exchange in October 2010, and its strength has greatly increased.
Dongfang Electric is not far behind. On October 1, 2010, Dongfang Electric's first 1.5-megawatt direct-drive wind turbine unit with independent intellectual property rights successfully carried 100 kilowatts of grid-connected power. The grid-connected power generation of Wuji's first wind power symbolizes that Dongfang Electric's direct-drive wind turbines have entered the first-line market and successfully entered the ranks of high-capacity direct-drive turbines.
There are also a few rising stars in wind power equipment suppliers. In October 2010, Zhang Chuanwei, chairman of Mingyang Wind Power, sounded the opening bell of the New York Stock Exchange and announced the successful listing of the Mingyang wind power industry in the United States.
Inventory 3: Wind power development progresses
On November 4, 2010, Gansu's 750-kilovolt network project was put into operation and the first phase of the first phase of the Jiuquan wind power base in Jiuquan was started. Gansu's 750-kilovolt network project was a major step for the State Grid Corporation of China to respond positively to the strategic deployment of the western development. The initiative is the main channel for the transmission of power from the 10 million kilowatt-class wind power bases in Jiuquan, and is the key project for the construction of power grids in the “Eleventh Five-Year Plan†period in Gansu Province.
After the project was put into operation, the network between Xinjiang Power Grid and Northwest China Power Grid was realized, which was of great significance for the promotion of energy development in Xinjiang and the realization of the “Outsourcing of Xinjiang Powerâ€. At the same time, the project also provided an outbound channel for 5.16 million kilowatts of wind power in Jiuquan, Gansu Province, which made water, fire and wind power “bundling†eastward in the northwest region a reality, which is conducive to the digestion of the northwestern region in a wider range. The green clean energy of the kilowatt-class wind power base is an important milestone in the construction of the national grid.
Inventory 4: Fans cut prices, export growth
Due to the increasing localization of wind turbines in China and lower transportation costs, the price of wind turbines has dropped from about 6,200 yuan per kilowatt in early 2008 to 4,500 yuan per kilowatt. On October 26th, 2010, the reporter learned from the "Zhangjiakou Dam Million Kilowatt-class Wind Power Base Phase II" and "Hami Xinjiang Ten Thousand Kilowatt-class Wind Power Base Southeast Wind Zone Wind Power Unit Tender Conference" that Goldwind Technology [20.56- 0.77%] reported 3,850 yuan/kW, Sinovel Wind Power Co., Ltd. [74.16-0.56%] reported a tender price of 3,983 yuan/kw. The decline in the price of Chinese wind turbines led to a significant price advantage for Chinese wind turbines in the international wind power market, to a certain extent. Promote the enhancement of China's export capacity of wind turbines.
On September 13, 2010, the first set of wind turbines made in China was exported at Luojing Port. The wind turbines shipped this time were the first set of wind turbines independently developed by China, totaling 296 tons of 25 wind turbines exported to Australia. According to industry insiders, the export of the whole set of generators indicates that China has fully grasped the manufacturing technology of wind turbines and reached world-class standards.
On September 29, 2010, Shenyang Ruixiang Wind Energy Equipment Co., Ltd. made the first 2.05 MW wind power generator set tailored for the United States from Shunde New District and became the "pioneer" of the US 600 MW wind power generating unit project.
In addition, in June 2010, CSR Zhuzhou Electric opened a offshore wind turbine production base in Dafeng, Jiangsu. The base project has a total investment of 90 million yuan and is expected to be put into production in August 2011.
Industry experts pointed out: "China's wind turbines have a price advantage, the same fans, Chinese products are 25% to 30% cheaper than foreign countries, Chinese products as long as the quality is decent, in the international arena still have a competitive advantage."
The modern hydraulic cylinder Seal Repair kit is a kit used to repair hydraulic cylinder seals, which includes various sealing rings, O-rings, U-rings, oil seals, and other components required for hydraulic cylinder seals.
Hydraulic cylinder seals are a very important component in hydraulic systems, and their sealing performance directly affects the efficiency and lifespan of the hydraulic system.
When there is leakage or damage to the hydraulic cylinder seal, it is necessary to replace the seal in a timely manner.
The hydraulic cylinder seal repair kit has the following advantages:
1. High quality materials: The hydraulic cylinder sealing repair kit is made of high-quality materials such as rubber and polyurethane, which have good wear resistance, oil resistance, high temperature resistance, and other characteristics, ensuring the long-term stability and reliability of the sealing components.
2. Multiple sizes and specifications: The hydraulic cylinder sealing repair kit provides various sizes and specifications of sealing components, which can meet the needs of different models and specifications of hydraulic cylinders.
3. Easy to install: The seals in the hydraulic cylinder sealing repair kit are designed and manufactured according to the structure of the hydraulic cylinder, making installation very convenient. The seals can be quickly replaced, reducing maintenance time and costs.
4. Economical and practical: The hydraulic cylinder sealing repair kit has a relatively low price and can effectively extend the service life of the hydraulic cylinder, reduce maintenance costs, and is an economical and practical maintenance solution.
In short, the hydraulic cylinder seal repair kit is a very important hydraulic system maintenance tool, which can help users repair hydraulic cylinder leaks or damaged seals in a timely manner, ensuring the normal operation of the hydraulic system.
For Robex Cylinder Seal Kit,For Robex Swing Motor Seal Kit,Swing Motor Seal Kit For Robex,Swing Motor Seal Kit
Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com