Ls-Ydc-600 Large Capacity Oil System Flushing Machine

Model NO.: LS-YDC-600
Capacity: 0~400cbm/H
Filtering Stages: 2 Stages, Contains Auto Backwash
Filtration Precision: 10micron
Oil Quality After Flushing: Water Content No More Than 100ppm
Heating Method: Electric
Heating Power: 80kw
Inlet/Outlet Diameter: Dn200
Material: Carbon Steel or Stainless Steel
Suitable for Machine Set: 200~300MW
Trademark: LUSHUN
Transport Package: Wooden Box
Specification: 3260mm*1900mm*2000mm
Origin: Chongqing, China
HS Code: 8421299090
Model NO.: LS-YDC-600
Capacity: 0~400cbm/H
Filtering Stages: 2 Stages, Contains Auto Backwash
Filtration Precision: 10micron
Oil Quality After Flushing: Water Content No More Than 100ppm
Heating Method: Electric
Heating Power: 80kw
Inlet/Outlet Diameter: Dn200
Material: Carbon Steel or Stainless Steel
Suitable for Machine Set: 200~300MW
Trademark: LUSHUN
Transport Package: Wooden Box
Specification: 3260mm*1900mm*2000mm
Origin: Chongqing, China
HS Code: 8421299090

LUSHUN LS-YDC-600 Large Capacity Oil System Flushing Machine

♦ Application:

LUSHUN LS-YDC-600 Large Capacity Oil System Flushing Machine is a large scale equipment devoted to flush large machineries used for power generation, national defence, metallurgy, aviation, petroleum, chemical engineering, mining, light industry, oil depots, and guarantees the production safety reliable movement of these machineries such as flushing newly installed or overhauled turbine oil system in power plants, large scale equipment oil system in steamships. Oil in the system shall be hydraulic oil, lubricating oil, and other liquid with similar nature of lubricating oil. Flushing pressure is not more than 0.65MPa. When it flushes these systems, all kinds of pollutants in the oil such as particles, fiber, oil sludge, even water content shall be purified. This plant is very efficient, low using cost, easy operation, simple maintenance and reliable working performance.

♦ Working Principle:

This plant is made of components such large flow capacity pump, flow regulating valve, filtration system, heater, meter, electric control cabinet, sampling value, etc. When running the plant, connect its inlet and outlet respectively to the inlet of oil supply mains on oil system tank and system to be flushed with temporary pipes to built a temporary circulatory system. The oil liquid is absorbed by large flow capacity pump from bottom of oil tank and finally gets into oil system through flow regulating valve, precision filter, high precision filter and heater step by step. The flushing oil liquid circulates with large flow capacity, the attainable flow speed in the oil supply mains reaches 6-7m/s and more, this speed is 7-8 times by that of normal operating. With high speed, the oil liquid lashes pollutants on pipeline inwall. By purification functions of filters and continuous purification while flushing, cleanness of oil in the pipeline meets the requirements of operation standard. It adopts heater to increase the oil temperature (≤70ºC). When oil system sets with cooler, cooling operation (20ºC~30ºC) is available after heating operation is stopped, and then rewashing by alternating temperature shall be realized and the flushing effects shall be improved. Besides, when oil temperature reaches 55ºC~70ºC, start the vapor extractor, fast moisture can be removed by means of large flow agitation.

♦ Technical Specification:

Item

Unit

LS-YDC-600

Flow Rate

m3/h

0-600

Working Pressure

Mpa

≤0.65

Filtering Stages

-

2 stage, contains automatic back wash.

Filtration Precision

μm

≤10μm

Flushed Filtrate

-

Water content ≤100ppm

Heating Temperature

Kw

80

Total Power

Kw

154

Overall Dimensions (L×W×H)

mm

3260×1900×2000

Inlet/Outlet Diameter

mm

DN200

Units Applied To (MW)

-

200-300

Note: Above size and weight of this equipment are for reference only, the specific data shall be subject to its physical object.

 
Ls-Ydc-600 Large Capacity Oil System Flushing Machine

LUSHUN LS-YDC-600 Large Capacity Oil System Flushing Machine

♦ Application:

LUSHUN LS-YDC-600 Large Capacity Oil System Flushing Machine is a large scale equipment devoted to flush large machineries used for power generation, national defence, metallurgy, aviation, petroleum, chemical engineering, mining, light industry, oil depots, and guarantees the production safety reliable movement of these machineries such as flushing newly installed or overhauled turbine oil system in power plants, large scale equipment oil system in steamships. Oil in the system shall be hydraulic oil, lubricating oil, and other liquid with similar nature of lubricating oil. Flushing pressure is not more than 0.65MPa. When it flushes these systems, all kinds of pollutants in the oil such as particles, fiber, oil sludge, even water content shall be purified. This plant is very efficient, low using cost, easy operation, simple maintenance and reliable working performance.

♦ Working Principle:

This plant is made of components such large flow capacity pump, flow regulating valve, filtration system, heater, meter, electric control cabinet, sampling value, etc. When running the plant, connect its inlet and outlet respectively to the inlet of oil supply mains on oil system tank and system to be flushed with temporary pipes to built a temporary circulatory system. The oil liquid is absorbed by large flow capacity pump from bottom of oil tank and finally gets into oil system through flow regulating valve, precision filter, high precision filter and heater step by step. The flushing oil liquid circulates with large flow capacity, the attainable flow speed in the oil supply mains reaches 6-7m/s and more, this speed is 7-8 times by that of normal operating. With high speed, the oil liquid lashes pollutants on pipeline inwall. By purification functions of filters and continuous purification while flushing, cleanness of oil in the pipeline meets the requirements of operation standard. It adopts heater to increase the oil temperature (≤70ºC). When oil system sets with cooler, cooling operation (20ºC~30ºC) is available after heating operation is stopped, and then rewashing by alternating temperature shall be realized and the flushing effects shall be improved. Besides, when oil temperature reaches 55ºC~70ºC, start the vapor extractor, fast moisture can be removed by means of large flow agitation.

♦ Technical Specification:

Item

Unit

LS-YDC-600

Flow Rate

m3/h

0-600

Working Pressure

Mpa

≤0.65

Filtering Stages

-

2 stage, contains automatic back wash.

Filtration Precision

μm

≤10μm

Flushed Filtrate

-

Water content ≤100ppm

Heating Temperature

Kw

80

Total Power

Kw

154

Overall Dimensions (L×W×H)

mm

3260×1900×2000

Inlet/Outlet Diameter

mm

DN200

Units Applied To (MW)

-

200-300

Note: Above size and weight of this equipment are for reference only, the specific data shall be subject to its physical object.

 
Ls-Ydc-600 Large Capacity Oil System Flushing Machine