The basic functions of the back-up fire-fighting vehicle are to provide fuel for the fire-fighting vehicle; to provide fire-fighting vehicles with foam, dry powder, carbon dioxide, nitrogen and other fire extinguishing agents; to provide special-purpose or special-purpose fire-fighting and rescue equipment; On-site replenishment of aeration and supply of backup breathing cylinders; provide basic livelihood protection for firefighters who have been extinguishing or fighting for a long time.
There are mainly two types of back-up fire-fighting vehicles that are backed by fire-fighting vehicle classification : fixed and modular. The fixed type refers to the structural type that integrates the equipment and vehicle chassis into an integrated structure. The basic structure is divided into the cab, equipment box area, fire extinguishing agent supply equipment area and life support area. Modular refers to the assembly of the equipment and equipment module, and the structure type set separately from the vehicle chassis. When in use, the corresponding module can be hauled by the vehicle to the fire site. At present, there are SJD5190TXFHY multifunctional support module fire engines in China. The vehicle uses a liberation Jiuping Diesel unloading chassis equipped with a hydraulic loading and unloading mechanism and a module locking device. It can be loaded, transported and unloaded. Columns to be used for fire protection: foam liquid module (liquid capacity of 7 cubic meters) and CO2 module (40L) Carbon dioxide gas cylinder 64), dry powder module (2T dry powder tank 2), equipment module, cylinder supply module. The equipment module and the cylinder supply module can be combined into one module when the number of equipment is small. At the same time, life support and medical assistance equipment can also be configured.
Back-up fire truck
[1]1. This machine adopts the method of rolling and peeling, which has the advantages of stable performance, long service life, good peeling effect, high productivity, low half-grain rate and good quality, etc. It is suitable for processing peeled peanuts of various specifications.
2. Main structure and function:
Main structure and function: It adopts a roller rubbing structure. The dried peanuts enter the main machine through the hopper, and the red skin is removed by the rubbing roller rotating at a high speed. discharge.
This unit consists of a peeling machine and a skin storage device.
1. The peeling machine is used to remove the red skin of peanuts of various specifications;
2. The skin storage device is used to take off the red skin and suck it into the skin bag through the fan.
3. Operation precautions and sequence
Before starting the machine, check whether the power supply circuit is normal and whether there is any looseness in each part. Whether the test run is normal or not, it cannot be reversed. Turn it in the direction of the arrow.
1. Start the peeler
2. Seeing the speed of the material, re-adjust the height of the discharge door (twist the two right-angle screws on the front), after the adjustment, the half-grain rate is low, and the removal rate is the best height.
Groundnut Skin Removing Machine,Peanut Skin Removing Machine,Peanut Huller Machine Modification,Peanut Peel Off Machine
Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com