Our factory has a full set of filter technology and filter production equipment (include quality monitoring equipment) which is imported from Japan. At the meantime, Our factory adhering to the technology advantage of CN-CA reinforced membrane( the important new product of 85 national torch plan) And Nylon reinforced membrane(the first Nylon creator). And our factory also the domestic leading technical level in producing reinforced PVDF membrane.  The products and services we offer will provide world class quality.
                             PTFE Filter Cartridge
Introduction:
Â
The filtration media of PTFE micropore filter catridge is hydrophobicity PTFE membrane, it is constructed of two materials PTEE and PP to meet high standards of chemical and pharmaceutical industry. The benefit summary: strong hydrophobicity, high retention rate, super chemical tolerance and thermal stability, good intension, withstand shocks and back pressure. All products have passed 100% integrity accord with FDA and chinese Pharmacopoeia.Â
Â
Specifications:
Â
Filter medium: hydrophobicity PTFE membrane
Support layer: PP
Filter cage: PP
Pore size: 0.1, 0.2, 0.45, 1 (um)
Length: 5", 10", 20", 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area:Â >=0.64square meter/10"
Diameter: 68mm
Working temperature: ≤65ºC
Max. operating temperature: 90ºC(P≤0.1Mpa)
Max. bear temperature: 140ºC, 0.27Mpa
Max. positive pressure: 0.42Mpa (23ºC)
PH value: 1--14
Sterilizing: temperature: 121ºC  30min
Others: special requirement of diameter and end caps can be customized
Â
Typical Applications:
Chemical industry; Gas filtration etc.
Â
| Materials of Construction | |
| Membrane | PTFE |
| Support and Drainage | PP |
| Core, Cage | PP |
| End Caps | DOE, SOE (code2, code3, code7, code8) |
| O-rings/Gasket | Silicone/EPDM/Viton/TEV |
| Sealing Technology | Thermal Bonding, No Adhesives |
| Dimensions | |
| Diameter | Φ68 |
| Length | 5 inch, 10 inch, 20 inch, 30 inch, 40 inch |
| Filtration Area, ft 2 | |
| ≥ 6.4 per 10-inch element | |
| Pore Size, μm | |
| 0.01 (for gas),0.1, 0.2, 0.45, 1 (um) | |
| Maximum Differential Pressure | |
| Forward: 4.2 bar @ 23 C | |
| Nitrogen Flow Rate & Pressure Drop , per 10-inch cartridge | |
| ≥ 60 m 3 /h at 0.1 bar with 0 bar outlet pressure | |
| ≥ 120 m 3 /h at 0.1 bar with 2 bar outlet pressure | |
| Integrity Test - at 23 C | |
| Bubble point | ≥ 1100 mbar with 60/40% IPA/water |
| HydroCorr (water intrusion test) | ≤ 0.75mL/min per 10-inch cartridge with water at 2620mbar |
        ABOUT US:    Our factory has a full set of filter technology and filter production equipment (include quality monitoring equipment) which is imported from Japan. At the meantime, Our factory adhering to the technology advantage of CN-CA reinforced membrane( the important new product of 85 national torch plan) And Nylon reinforced membrane(the first Nylon creator). And our factory also the domestic leading technical level in producing reinforced PVDF membrane.  The products and services we offer will provide world class quality.
                             PTFE Filter Cartridge
Introduction:
Â
The filtration media of PTFE micropore filter catridge is hydrophobicity PTFE membrane, it is constructed of two materials PTEE and PP to meet high standards of chemical and pharmaceutical industry. The benefit summary: strong hydrophobicity, high retention rate, super chemical tolerance and thermal stability, good intension, withstand shocks and back pressure. All products have passed 100% integrity accord with FDA and chinese Pharmacopoeia.Â
Â
Specifications:
Â
Filter medium: hydrophobicity PTFE membrane
Support layer: PP
Filter cage: PP
Pore size: 0.1, 0.2, 0.45, 1 (um)
Length: 5", 10", 20", 30", 40"
Sealing material: Silastic, NBR, EPDM, Viton
Airtight method: thermal bonding technique
Effective filtration area:Â >=0.64square meter/10"
Diameter: 68mm
Working temperature: ≤65ºC
Max. operating temperature: 90ºC(P≤0.1Mpa)
Max. bear temperature: 140ºC, 0.27Mpa
Max. positive pressure: 0.42Mpa (23ºC)
PH value: 1--14
Sterilizing: temperature: 121ºC  30min
Others: special requirement of diameter and end caps can be customized
Â
Typical Applications:
Chemical industry; Gas filtration etc.
Â
| Materials of Construction | |
| Membrane | PTFE |
| Support and Drainage | PP |
| Core, Cage | PP |
| End Caps | DOE, SOE (code2, code3, code7, code8) |
| O-rings/Gasket | Silicone/EPDM/Viton/TEV |
| Sealing Technology | Thermal Bonding, No Adhesives |
| Dimensions | |
| Diameter | Φ68 |
| Length | 5 inch, 10 inch, 20 inch, 30 inch, 40 inch |
| Filtration Area, ft 2 | |
| ≥ 6.4 per 10-inch element | |
| Pore Size, μm | |
| 0.01 (for gas),0.1, 0.2, 0.45, 1 (um) | |
| Maximum Differential Pressure | |
| Forward: 4.2 bar @ 23 C | |
| Nitrogen Flow Rate & Pressure Drop , per 10-inch cartridge | |
| ≥ 60 m 3 /h at 0.1 bar with 0 bar outlet pressure | |
| ≥ 120 m 3 /h at 0.1 bar with 2 bar outlet pressure | |
| Integrity Test - at 23 C | |
| Bubble point | ≥ 1100 mbar with 60/40% IPA/water |
| HydroCorr (water intrusion test) | ≤ 0.75mL/min per 10-inch cartridge with water at 2620mbar |
Sss Spunbond Nonwoven Production Line
SSS: Spunbond non-woven fabric + spunbond non-woven fabric + spunbond non-woven fabric = 3 layers of fiber web hot rolled; S non-woven fabrics, SS non-woven fabrics, SSS non-woven fabrics can be produced, according to non-woven fabrics Cloth performance can be used for: surgical gowns, protective clothing, disinfection wraps, masks, diapers, civilian wipes, wipes, soft towel rolls, beauty products, sanitary napkins, sanitary pads and disposable sanitary cloths Cloths, tablecloths, bed sheets, bedspreads; clothing linings, fusible linings, wadding, shaped cotton, various synthetic leather base fabrics, industrial filter materials, insulating materials, cement packaging bags, geotextiles, covered cloths, crop protection cloths, seedling cloths , Irrigation cloth, thermal insulation curtain, other space cotton, thermal insulation materials, linoleum, cigarette filters, tea bags, etc. Mainly used in disposable hygiene products industry, medical health industry, beauty care and other industries.In terms of environmental protection, the raw material of most of the non-woven fabrics currently used is polypropylene, while the raw material of plastic bags is polyethylene. Although the names of the two substances are similar, their chemical structures are far apart. The chemical molecular structure of polyethylene is very stable and extremely difficult to degrade, so it takes 300 years for plastic bags to be decomposed; while the chemical structure of polypropylene is not strong, the molecular chain can easily be broken, which can be effectively degraded , And enter the next environmental cycle in a non-toxic form, a non-woven shopping bag can be completely decomposed within 90 days. Moreover, the non-woven shopping bag can be reused more than 10 times, and the pollution degree to the environment after being discarded is only 10% of that of the plastic bag.
Sss Spunbond Nonwoven Production Line,Pp Sss Spunbond Nonwovenfabric Making Machine,Sss Pp Spunbond Nonwoven Calendering Machinery,Sss Non-Woven Fabric Production Line
Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.smmsmachine.com