Model NO.: KP-80
Engine Type: Lb20
Engine Power: 5.0HP
Speed No-Load (Rpm): 3600
Flexible Pipe (M): 4-8
Trademark: KZW
Transport Package: carton
Specification: 3"
Origin: China
Model NO.: KP-80
Engine Type: Lb20
Engine Power: 5.0HP
Speed No-Load (Rpm): 3600
Flexible Pipe (M): 4-8
Trademark: KZW
Transport Package: carton
Specification: 3"
Origin: China
Kerosene Oil Engine Water Pump (KP80)The kerosene oil engine water pump is a self-prime centrifugal water pump, which burnt kerosene, but start by the oil. Then engine with the pump set together. There are several models by the different head size.
Features
1. The kerosene water pump consumes minimum amount of oil while delivering maximum power output. It is lightweight and generates little noise during running.
2. The self-priming pump comes with an air-cooled, 4-stroke gasoline engine that features an overhead valve.
3. Enclosed casing
4. Ease of operation
5. The pump does not need any other power source. It provides safe, reliable functioning.
6. This device is commonly used to pump water for irrigation or industry use.
Specifications
| Item | Kerosene Engine Water Pump | |
| Type | KP50(2") | KP80(3") |
| Motor | Air-cooled, 4-stroke, single-cylinder | |
| Motor Power | Ray-out 5.0HP | Ray-out 5.0HP |
| Speed | 3600 RPM | 3600RPM |
| Fuel | Kerosene & gasoline when starting(90#) | Â |
| Tank Capacity | Kerosene 3.4L Gasoline 0.17L Lubricating oil 0.6L | |
| Inlet Diameter | 50MM | 80MM |
| Outlet Diameter | 50MM | 80MM |
| Suction Lift | 8meter | 8meter |
| Pump Lift | 31meter | 31meter |
| Flow Rate | 30m3Â /h | 60m3Â /h |
| Start-up Method | Recoil start | Recoil start |
| Shaft Seal | Carbon ceramic | Carbon ceramic |
| Pump Inner Face | Aluminum | Aluminum |
| N.W./G.W. | 29kg /30kg | 33kg/34kg |
| Package Size | 52×41×46 | 52×41×46 |
| Package Method | Carton | Carton |
 Kerosene Oil Engine Water Pump (KP80)
The kerosene oil engine water pump is a self-prime centrifugal water pump, which burnt kerosene, but start by the oil. Then engine with the pump set together. There are several models by the different head size.
Features
1. The kerosene water pump consumes minimum amount of oil while delivering maximum power output. It is lightweight and generates little noise during running.
2. The self-priming pump comes with an air-cooled, 4-stroke gasoline engine that features an overhead valve.
3. Enclosed casing
4. Ease of operation
5. The pump does not need any other power source. It provides safe, reliable functioning.
6. This device is commonly used to pump water for irrigation or industry use.
Specifications
| Item | Kerosene Engine Water Pump | |
| Type | KP50(2") | KP80(3") |
| Motor | Air-cooled, 4-stroke, single-cylinder | |
| Motor Power | Ray-out 5.0HP | Ray-out 5.0HP |
| Speed | 3600 RPM | 3600RPM |
| Fuel | Kerosene & gasoline when starting(90#) | Â |
| Tank Capacity | Kerosene 3.4L Gasoline 0.17L Lubricating oil 0.6L | |
| Inlet Diameter | 50MM | 80MM |
| Outlet Diameter | 50MM | 80MM |
| Suction Lift | 8meter | 8meter |
| Pump Lift | 31meter | 31meter |
| Flow Rate | 30m3Â /h | 60m3Â /h |
| Start-up Method | Recoil start | Recoil start |
| Shaft Seal | Carbon ceramic | Carbon ceramic |
| Pump Inner Face | Aluminum | Aluminum |
| N.W./G.W. | 29kg /30kg | 33kg/34kg |
| Package Size | 52×41×46 | 52×41×46 |
| Package Method | Carton | Carton |
Â
CNC glass Engraving Machine a special model specially designed for glass processing by our team through years of research. The spindle system and body of this model are completely to work for glass. Machining work design. Based on the advantages of similar international products and the summary of our own practice, our team has successfully designed a professional machining center with high quality processing performance and high cost performance.
Cnc Glass Engraving Machine,Glass Engraving Machine,Cnc Glass Engraving Machine Modification,Automatically Cnc Glass Engraving Machine
JINAN WEILI MACHINE CO LTD , https://www.wlglassmachine.com