Based on the introduction of foreign advanced technology, Jiangsu Xinhaolong Drying Engineering Co., Ltd. has successfully developed a new type of cellulose dryer, which has advanced technology, reasonable design, compact structure, wide application range, good yield and quality, and once in the same equipment. Drying, smashing and sieving are completed. The performance of the whole machine reaches the advanced level at home and abroad.
Cellulose is a macromolecular polysaccharide composed of glucose, insoluble in water and general organic solvents. It is the main component of the plant cell wall. As long as the human body ingests 10 grams of cellulose per day, it can reduce 15% of the heat absorption, which is a kind of weight loss. Substantially effective material.
The equipment consists of feeders, agitators, grading rings, cyclone separators, bag filter, drying main unit, shutoff blower and other components. It combines organic technologies such as swirling, fluidizing, spouting, drying and smashing and grading. Application, large-scale production of small equipment, high efficiency, low energy consumption.
The equipment has a variety of feeding devices for selection, so that the feeding is continuous and stable, no bridge phenomenon occurs in the middle; the special cooling device at the bottom of the dryer avoids deterioration of the material in the high temperature zone at the bottom; a special air separation device reduces the equipment. The resistance effectively provides the air flow of the dryer; the drying chamber is equipped with a grading ring and a swirling sheet to facilitate the adjustment of the material fineness and the final moisture; a special air pressure sealing device and a bearing cooling device effectively extend the service life of the transmission portion; and other Compared with the drying method, the specific gravity of the material can be effectively increased; the gas velocity inside the drying chamber is high, and the material residence time is short, which effectively prevents the sticking of the material and the heat-sensitive material from deteriorating. The use of a bag filter removes the environmental pollution due to the good sealability.
Activated Carbon Regeneration Rotary Furnace
In 1985, China National Gold Group Corporation was approved by theNational Economic Council,it decided
to introduce foreign advanced technology and equipment to conduct a technological reformation in Tongguan and Zhangjiakou gold mine. United States daiweimaiji company was responsible for the basic design, Changchun Gold Research Institute provided the technical support , introduced the first set electric-heated rotary kiln Activated Carbon Regeneration furnaces of gold industry in China.
In May of 1987 ,it was put into operation, and also has carried on the digestion of technology and domestic equipment reservation.In 2002 , we started to develop JHR-O series fuel oil heated active carbon regenerating furnace, August of 2004, it was put into practice in Zhang jiakou Gold mine of Hebei.In 1997 ,we also developed the JHR series electric heated active carbon regenerating furnace,in 2007, technology was upgraded and we also applied for patent of electrical ( gas ) heating rotary kiln for activated carbon regeneration equipments, gas prices rose dramatically in 2010, JHR-E series electric heating rotary kiln for active carbon regenerating furnace became the main force again.
Activated Carbon Regeneration Rotary Furnace,Rotary Kiln Furnace,Small Rotary Kiln,Electric Rotary Kiln
Changchun Gold Research Institute Co.LTD , https://www.changchungoldresearch.com