Roofing Tile Corrugated Sheet Roll Forming Machine

Posted on

  • Model NO.: 7200*1600*1500mm
  • Certification: CE, ISO
  • Customized: Customized
  • Transmission Method: Hydraulic Pressure
  • Specification: L*W*H
  • HS Code: 8455221000
  • Tile Type: Colored Steel
  • Condition: New
  • Usage: Roof, Wall, Floor
  • Trademark: HZZN
  • Origin: Zhejiang, China

Technical Data
1. Power requirement: main motor power 5.5KW, hydraulic station power 5.5KW.
2.Voltage: 3 phase,330-350V,50HZ (according to the local market.)
3. According to the above drawing, thickness 0.3-0.6mm, Q235A,width 1250mm
4.forming speed: 2-2.5m/min.
5. group of stands: about 17 groups
6.Internal Diameter of steel coil:508mm

Main consists and material
1.material of roller:high grade No.45 forged steel, plated hard chrome on the surface of roller
2. Active Shaft Material: high grade No.45 carbon wrought steel at ф75mm
3. Cutting Blade: Cr12 mould steel with quenched treatment, hardness HRC55-62.
4.Electric Elements:control system with PLC model ,touch screen, transducer adopt brand of Mitsubishi. 
5.Hydraulic parts:use the famous domestic brand.

Equipment consists

No. Name Qty.
1 5 T decoiler 1 set
2 Guiding equipment 1 set
3 Main machine for roll forming 1 set
4 Cutting equipment  1 set
5 PLC control system   1 set
6 Hydraulic station  1 set
7 2 meters supporter  2 sets

Spare parts
No. Name Qty.
1 electric relay  1 PC
2 travel switch 1 PC
3 selector switch  1 PC
4 push-button 2 PCS
5 bushed chain  1 PC
6 solenoid valve  1 PC
7 Suction filter 1 PC
8 O ring  5 PCS
9 pressure gage 1 PC
10 wrenches 1 set (1 PCS)

 
Price and business condition
FOB SHANGHAI OR NINGBO PORT, CHINA 
Delivery time need 65 days.
Payment: 30% deposit, balance by T/T before shipment. 

Contact
Mr. Philip Zhao 
  
Mobile number: 0086 15068758855 
 

 

High Power Graphite Electrode

Use and performance of Graphite electrodes

use

Used in steelmaking electric arc furnace, refining furnace, as conductive electrode; Used for industrial silicon furnace, phosphorus furnace and corundum furnace, as conductive electrode.

performance

High resistance to thermal shock and high mechanical strength

grade

High power Graphite Electrode (SHP) high power graphite electrode (UHP) with high power graphite electrode (HP) with high power graphite electrode (R

Precautions for use of graphite electrodes

1. According to the capacity of the electric furnace and the load of transformer, the grade and diameter of the electrode are suitable

2. When loading the electric furnace, the bulk charge shall be placed in the bottom of the furnace so as not to break the electrode. In the process of smelting, the lime should not be conductive. Large masses of objects are concentrated directly below the electrode, otherwise it will affect the electrode and even cause the electrode to break.

3. Attention should be paid to the position of the furnace cover. If the furnace cover is offset, the cover of the furnace will be blown on the lifting electrode, causing the electrode to be damaged.

4. When connecting the electrode, if the defect of joint bolt is found, the connection should be made after replacement

5. After the electrodes are connected, if there is a gap in the connection surface, it is important to find out the reason

6. The electrode should be used vertically.

7. The electrode holder shall be sandwiched between the upper and lower levels of the top electrode, and shall not be sandwiched between the warning line and the middle electrode. Otherwise, the electrode column is easily broken

8. The raw materials and production techniques of different manufacturers may vary. The physical and chemical properties of the electrode are also different, and it is recommended that the joints and electrodes produced by different manufacturers should not be used in a different way.



High Power Graphite Electrode,Die-Cast Graphite Electrodes,Bone Bit Graphite Electrod,Thermal Graphite

Fengcheng Ruixing Carbon Products Co., Ltd , https://www.lnfcrxts.com