Â
| NO. | NAME | MODEL | QTY | NOTE |
| 1 | Semi-automatic high temperature resistant blow molding machine -rotary infrared pre-heater |
BM-8YH | 1set | 2pcs blower + 1pc oven |
| 2 | HP Air Compressor | 2.4m3/min 30Kg | 1set | / |
| 3 | Air tank | Â | 1set | Â |
| 4 | Air dryer and filter | 2.0 m3/min 30Kg | 1set | / |
| 5 | Strong cold dryer air filter | 4.0 m3/min 30kg | 1set | / |
| 6 | High-pressure oil pipe | Â | 15m | / |
| 7 | Spare parts | One year | 1set | / |
| 8 | Water chiller | 3HP | 1pc | / |
| 9 | Die heater | Â | 2sets | Â |
| 10 | Bottle mold | 150ml-2000ml | 1set | 2 cavity |
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
Â
Features:
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.
|  Main machine (blower + oven) |
Model type | Tech data |
| Product Spec | Max. product volume(L/cav) | 2 |
| Max. preform neck size(mm) | 100 | |
| Max. product diameter(mm) | 180 | |
| Max. product height (mm) | 300 | |
| Cavities | 2 | |
| Blow molding part | Die force (KN) | 100 |
| Die stroke (mm) | 270 | |
| Max. mold size(mm) | 390*345 | |
| Mold thickness | Adjustable | |
| Mold spacing(mm) | Â | |
| Max. pulling stroke(mm) | 400 | |
| Operation pressure(Mpa) | 0.8-1.0 | |
| Operation air pressure consumption (1tr/min) |
200 | |
| Blow pressure(Mpa) | 1.2-2.8 | |
| Blow air pressure consumption (1tr/min) | 300 | |
| Output(pcs/h) | 1000-1800 | |
| Machine size(L*W*H)(m) | 1.46*0.58*1.8 | |
| Machine weight(KG) | 650 | |
| Oven | Temperature grade(rate) | 8 |
| Heating time(S) | 90-200 | |
| Voltage(V) | Customized | |
| Frequency(HZ) | 50/60 | |
| Total power(KW) | 16 | |
| Oven Size(L*W*H) | 1.35*0.55*1.15 | |
| Oven weight (KG) | 300 |
Function: Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.Â
| Air compressor | Unit | 2.4M3/min 30KG |
| Volume | M3 | 2.4 |
| Pressure | Kg | 30 |
| Speed | r/min | 720 |
| Power | KW | 15*2 |
| Overall Dimension | mm | 1800*1450*1000 |
| Weight | kg | 1000 |
Functions: Air filter is to clear up the impurities out of the compressed air, like carbon hydrogen, tiny dust and solid particles.
| Refining-Filter | Unit | 2.0M3/min 30Kg | 4.0M3/min 30Kg |
| Flow Capacity | M3/Min | 2 | 4 |
| Max. work pressure | Mpa | 3.0 | 3.0 |
| Inlet Temp. | ºC | ≤50 | ≤50 |
| Cold Medium | mm | 750*350*350 | 750*650*350 |
| Weight | Kg | 20 | 40 |
Air dryer:
Function: Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
| Refrigeration Air Dryer | Unit | 2.0M3/min 3.0Mpa | 4.0M3/min 3.0Mpa |
| Flow capacity | Nm3/min | 2.0 | 4.0 |
| W.P | Mpa | 3.0 | 3.0 |
| Inlet Temp. | ºC | ≤80 | ≤80 |
| Dew point | ºC | 23 | 23 |
| Ambient Temp. | ºC | ≤38 | ≤38 |
| Power supply | V/HZ | 220/50 | 220/50 |
| Compressor power | Kw | 0.75 | 1.5 |
| Cold Medium | mm | 1050×650×1100 | 1050×1250×1100 |
| Weight | Kg | 120 | 250 |
| Model | 03WCI | |
| 4.4/38ºC Cooling capacity(Kcal/h) | 7188 | |
| Compressor | All-closed vorticity | |
| Compressor power (KW) | 2.5 | |
| Refrigerant | R22 | |
| Chilled water pump power(KW) | 0.75 | |
| 10ºC Max. flow rate of chilled water(L/min) | 55 | |
| Flow water inlet and outlet pipe | 1'' | |
| Condensing water rate L/min | ≥36 | |
| Chilled water inlet and outlet pipe | 1'' | |
| Exterior dimension | Length(mm) | 1000 |
| Width(mm) | 600 | |
| Height(mm) | 1180 | |
| Water tank capacity | L | 50 |
| Weight | Kg | 150 |
Contact Us:Mr. Xavier GuoÂ
Tel: +86-512-58682331
Fax: +86-512-58682331
Mobile: +86-13405609100
Â
www.borun-machinery.com
Latex household gloves are a kind of gloves. Different from ordinary gloves, they are processed from latex. They can be used as household, industrial, medical, beauty and other industries. They are necessary hand protective articles. Latex gloves are made of natural latex and other fine additives. The products are comfortable to wear after special surface treatment. They are widely used in industrial and agricultural production, medical treatment and daily life. Latex gloves are divided into five types: smooth latex gloves, pitted latex gloves, striped latex gloves, transparent latex gloves and powder free latex gloves. Latex gloves are divided into disposable latex gloves, household latex gloves, industrial latex gloves, medical latex gloves, etc; Length: 23cm, 30cm (9 ", 12"); The thickness is 0.08mm-0.09mm; Color: beige and light yellow; Main ingredients: natural latex; Commodity import and export code 4015; Package: 100pcs / package (vacuum package); Specification: XS, s, m, l, XL; Latex gloves made of 100% natural latex have high dexterity, comfort and high strength. It has low pinhole rate and excellent sealing protection characteristics. It is widely used in electronics, food, medicine, optoelectronics and other related industries.
Rubber Latex Household Gloves,Latex Household Gloves,Rubber Household Gloves,Double Color Household Latex Glove
Glove Industry Co.,Ltd. , https://www.gloveind.com